 Journal Comment |
| | |
| | · Tickle four: Future foresight
E. Robinson, R.
|
| | |
| President's Corner |
| | |
| | · President's Corner
Landman, Gys
|
| | |
| Transaction Papers |
| | |
| | · Rheological assessment of titanium MIM feedstocks
Benson, J.M.; Richter, W.; Chikwanda, H.C.
|
| | |
| | · Leachability of nitrided ilmenite in hydrochloric acid
Swanepoel, J.J.; van Vuuren, D.S.; Heydenrych, M.
|
| | |
| | · Titanium production via metallothermic reduction of TiCl4in molten salt: Problems and products
van Vuuren, D.S.; Oosthuizen, S.J.; Heydenrych, M.D.
|
| | |
| | · Effect of process control agent (PCA) on the characteristics of mechanically alloyed Ti-Mg powders
Machio, C.; Chikwanda, H.K.; Chikosha, S.
|
| | |
| | · Microstructure evolution in Ti-6Al-4V alloy during hydrogen dosing at elevated temperature
Matthews, L.A.; Knutsen, R.D.
|
| | |
| | · The use of titanium hydride in blending and mechanical alloying of Ti-Al alloys
Mwamba, I.A.; Chown, L.H.
|
| | |
| | · The influence of Mn on the tensile properties of SSM-HPDC Al-Cu-Mg-Ag alloy A201
Möller, H.; Masuku, E.P.; Curle, U.A.; Pistorius, P.C.; Knutsen, R.D.; Govender, G.
|
| | |
| | · Nitriding of ilmenite and high-grade slag fines
van Vuuren, D.S.; Tshilombo, G.T.
|
| | |
| | · Solidification of an Al-Zn alloy during semi-solid processing
George, S.L.; Knutsen, R.D.
|
| | |
| Journal Papers |
| | |
| | · Monte Carlo simulation of Pt-Al thin film diffusion
Harris, R.A.; Terblans, J.J.; Swart, H.C.; van der Lingen, E.
|
| | |
| | · Fluid bed chlorination pilot plant at Mintek
Kale, A.; Bisaka, K.
|
| | |
| | · In search of low cost titanium: The Fray Farthing Chen (FFC) Cambridge process
Oosthuizen, S.J.
|
| | |
| | · Production of titanium metal powder by the HDH process
Goso, X.; Kale, A.
|
| | |
| | · Establishment of rapid prototyping/additive manufacturing in South Africa
de Beer, D.J.
|
| | |
Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons
pdf