JOURNAL PAPER

Case study: High capacity spiral concentrators

P. Ramsaywok; M.K.G. Vermaak; R. Viljoen

Exxaro Resources

SYNOPSIS

Spiral concentrators are compact, cost-effective and generally efficient gravity concentration separators for a wide range of applications (for example: coal, beach sands, iron ore, chromite and tantalite). Large mineral processing plants consist of thousands of spiral concentrators resulting in large plant footprints (capital intensive) and the adjustment of splitters is time consuming, impractical and is in many cases neglected-high capacity (HC) spiral concentrators aim to address these shortcomings. As a result Exxaro Namakwa Sands is currently investigating high capacity spiral technology for the spiral circuit upgrade at the primary concentrator plants (PCPs). This article summarizes the rougher spiral performance evaluation that was conducted on different types of spiral concentrators (the traditional MG4 spiral concentrator and the high capacity (HC) spiral concentrator) under different feed conditions. In addition, the effect of slimes on the spiral concentrator performance was also investigated. Slimes rheology was linked to the poor concentrator performance at the higher slimes concentrations. The test campaign shows a sacrifice in recovery under design-feed conditions can be expected when using high capacity spiral concentrators in the rougher stage when compared to traditional spiral technology currently in use. Both spiral concentrators show a detrimental impact of slimes on the performance, but the high capacity spiral concentrator is more sensitive to the higher slimes conditions.

Keywords: Spiral concentrators, high capacity spirals, slimes, heavy minerals

“Full text available only in PDF format”

References

1. HOLLAND-BATT, A.B. Some design considerations for spiral separators, Minerals Engineering Lake Tahoe, 1995.         [ Links ]

2. WILLS, B.A. Wills' Mineral Processing Technology, Seventh Edition, Oxford, 2007.         [ Links ]

3. GRACIE, S. Redesigning the industry standard-a new look at the wet concentrator circuit. The 7th International Heavy Minerals Conference 'What next', The Southern African Institute of Mining and Metallurgy, 2009. pp. 107-108, 110        [ Links ]

4. Separation solutions, Outokumpu Technology Physical Separation Newsletter, issue 1, 2005.         [ Links ]

5. RICHARDS, R.G. and PALMER, M.K. High Capacity gravity separators; a review of current status. Minerals Engineering, vol. 10, no. 9 1997. pp. 973-982.         [ Links ]

6. ERASMUS, W. Personal communications, 2010.         [ Links ]

7. ABELA, R. The effect of the slimes content on the rougher spiral circuit in a heavy mineral sands operation, Proceedings of the Heavy Mineral Conference 2003, 2003.         [ Links ]

8. BROWN, R. Slimes Effect on Spiral Efficiency, Report on the Cooljarloo North Mine, 2001,         [ Links ]

9. MORKEL, J. and VERMAAK, M.K.G. The role of swelling clay in kimberlite weathering, Mineral. Processing and Extractive Metallurgy (Trans. Inst. Min. Metall. C), 2006, vol. 115, no. 3, pp. 150-154.         [ Links ]

Bibliography

1. MATTHEWS, W.B., FLEYCHER, C.A.J., and PARTRIDGE, T.C. Particle flow modelling on spiral concentrators: Benefits of dense media for coal processing? Second International Conference on CFD in the Minerals and Process Industries, CSIRO, Melbourne, Australia, 1999.         [ Links ]

2. MARCOS, S.P. and GILMAN, K.S. 'Old tricks for new dogs' Areas for focus in mineral sand processing. The 6th International Heavy Minerals Conference 'Back to Basics', The South African Institute of Mining and Metallurgy, 2007, pp. 55-61.         [ Links ]