TRANSACTION PAPER

The use of low-toxic heavy suspensions in mineral sands evaluation and zircon fractionation

L. Koroznikova^I; C. Klutke^I; S. McKnight^I; S. Hall^II

^ISchool of Science and Engineering, University of Ballarat, Australia
^IIMIRARCO, Laurentian University, Sudbury, Canada

SYNOPSIS

This paper outlines a simple methodology for mineral characterization, developed as part of the Australian Mineral Industry Research Association (AMIRA) managed research project P777 'The Development of Heavy Suspension Techniques for High Density Separations (Replacement of Clerici's Solution)'. The project was sponsored by De Beers, Rio Tinto and Iluka Resources.
Heavy mineral characterization of samples arising from exploration, mining or metallurgical processes is frequently conducted using laboratory heavy liquid analysis. Unfortunately, there are only a limited number of high density ('heavy') liquids and these tend to be more toxic as their density increases. Lowtoxicity inorganic solutions, based on tungsten compounds, have been developed that can be utilized at relative densities (RD) up to 3.0. Beyond this value organic liquids can be used; however, this presents significant health and safety hazards. Diiodomethane (methylene iodide) having a relative density of 3.31 is commonly used. Mixtures of thallium formate and thallium malonate were found in the early 1900s by Clerici to provide liquids having specific gravities between 4.0 and 5.0. For the characterization of the heavy components of mineral sand deposits (e.g. anatase RD 3.9, rutile RD 4.2, ilmenite RD 4.4-4.7 and zircon RD 4.6-4.8) there is currently no heavy liquid alternative to Clerici's solution. Clerici's solution is highly toxic and testing is now conducted by few laboratories worldwide, with costs reflecting the chemical costs, infrastructure costs and health and safety regimes (e.g. blood testing of exposed staff). A simple laboratory technique of density fractionation has been developed, employing suspensions of fine tungsten carbide particles in lithium heteropolytungstates solutions, that can replace Clerici's solution in the evaluation of fine mineral sands samples (e.g. -250 +150 microns). The developing methodology that can achieve low-cost, low-toxic separations at relative densities above 4.0 is outlined and the comparison of results with Clerici's solution presented. In addition, preliminary work on density fractionation of zircon samples is presented. Zircon fractionation relates to their inclusion, radionuclide content and metamictization.

“Full text available only in PDF format”

References

1. AUSTRALIAN STANDARDS, Heavy mineral sand concentrates-Physical testing Part 2: Determination of heavy minerals and free quartz-Heavy liquid separation method, 4350.L, 1999.         [ Links ]

2. AUSTRALIAN STANDARDS, Methods for Sampling and Testing Aggregates-Method 6.2: Particle density and water absorption of coarse aggregate-Pycnometer method, AS 1141.6.2. 1996.         [ Links ]

3. BROWNING, J.S. Heavy Liquids and Procedures for Laboratory Separation of Minerals, USBM Info. Circular No. 8007, 1960, 14 pp.         [ Links ]

4. BURT, R.O. and MILLS, C. Gravity Concentration Technology, vol. 5, Oxford, 1984.         [ Links ]

5. GILMAN, S.K. and HUGO, V.E. Mineral Sands Mineralogy and Metallurgy- Can They Speak the Same Language? TZ Minerals International, 2003, obtained via www.tzmi.com.         [ Links ]

6. EROGLU, B. and STALLKNECHT, H. A Laboratory Density Analysis Developed Using Non-toxic Heavy Liquid, Ozbayoglu et al. (eds.), Proceedings of the 8th International Mineral Processing Symposium, Antalya, Turkey, 2000, pp. 111-116.         [ Links ]

7. HOLLAND, H. and GOTTFRIED, D. The Effect of Nuclear Radiation on the Structure of Zircon, Acta Cryst. vol. 8, 1955, pp. 291-300.         [ Links ]

8. MASON, T. Exploration to Mining, RZM at Weman, Stewart R. (ed.), Murray Basin Mineral Sands Conference: Extended Abstracts, Australian Institute of Geoscientists, Australia, 1999.         [ Links ]

9. OVERBREEKK, P.W. The upgrading of Mamatwan manganese ores by heavy-medium separation, Mintek Report M256D, South Africa, 1986, 35 pp.         [ Links ]

10. PAGEL, M., BARBIN, V., BLANC, P., and OHNENSTETTER, D. Cathodoluminescence in geoscience. Springer, Berlin, 2000.         [ Links ]

11. RHODES, D., HALL, S.T., and MILES, N.J. Density Separation in Heavy Inorganic Liquid Suspensions, XVIII International Mineral Processing Congress, Sydney, 1993, pp. 375-377.         [ Links ]

12. TZMI, Mineral Sands Annual Report 5, TZ Minerals International Limited, 2001.         [ Links ]

13. WILLS, B.A. Mineral Processing Technology, 6th edition, Oxford, 1997        [ Links ]