Abstract

NAVARRO TORRES, V.F. et al. Probability of failure and factor of safety in the design of interramp angles in a large open iron ore mine. J. S. Afr. Inst. Min. Metall. [online]. 2022, vol.122, n.7, pp.363-376. ISSN 2411-9717.  http://dx.doi.org/10.17159/2411-9717/2025/2022.

This paper shows the importance of performing probabilistic analyses in open pits, especially for mine planning, which can lead to more efficient ore extraction and meeting the acceptability criteria for safety in mine slopes. Three-dimensional stability analyses were performed to evaluate the future geometry of a large open pit for iron ore extraction in Brazil. The strength parameters of the lithologies were calibrated using ruptures in the pit walls. After determining the factors of safety (FoSs) from the calibrated parameters, probabilistic analyses were performed using the total range of values of each parameter under different field conditions to verify the reliability of the initial analysis. In this sense, it was possible to plot the probability of failure (PoF) and the FoS on the graph of slope height versus slope interramp angle (IRA) for the future pit in each lithology. IRA recommendations are made for two scenarios: (1) the best scenario: dry without ubiquitous joints and (2) the worst scenario: the water table at 10 m depth with ubiquitous joints in the most unfavourable direction. The results show that probabilistic evaluation is an important tool for establishing alert mechanisms in slopes that can be termed stable.

Keywords : probability of failure; factor of safety; response surface method; iron ore; open pit; three-dimensional model; interramp angle.

        · text in English     · English ( pdf )