SciELO - Scientific Electronic Library Online

 
vol.26A Review of the Machinability of Titanium AlloysDeveloping a Low-cost Seven Degree of Freedom Minimally Invasive Surgical Manipulator índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

    Links relacionados

    • Em processo de indexaçãoCitado por Google
    • Em processo de indexaçãoSimilares em Google

    Compartilhar


    R&D Journal

    versão On-line ISSN 2309-8988versão impressa ISSN 0257-9669

    Resumo

    WODAUSCH, J. et al. Auto-ignition Prediction During Hot Start Conditions. R&D j. (Matieland, Online) [online]. 2010, vol.26, pp.53-57. ISSN 2309-8988.

    This paper describes the development of an empirical thermodynamic single-zone model to predict auto-ignition in an internal combustion engine. In this case the development basis is a 1.4 L multi port injection (MPI) internal combustion engine. A model was created to calculate the probability of auto-ignition with regards to the engine design, thermodynamic laws and the carbtiretion of the air-fuel mixture. The theoretical model developed was verifíed with measurements. Adequate correlation between the predicted and measured probability results was obtained.

    Palavras-chave : Knack detection modelling.

            · texto em Inglês     · Inglês ( pdf )