Resumo

GOUVEA, J.P.  e  GEEL, W.. Review of quality assurance methods for hydro-powered resin bolting. J. S. Afr. Inst. Min. Metall. [online]. 2025, vol.125, n.11, pp.637-648. ISSN 2411-9717.  https://doi.org/10.17159/2411-9717/860/2025.

Resin bolting in South Africa has been developed and refined in underground coal mines (i.e., soft rock) since the late 1940s. The extension of resin bolting to hard rock mines started in 2003 and has required significant adaptations, challenging the status quo from both a supplier and applicator perspective. As far as resin bolting is concerned, the most affected aspect in coal mining and hard rock mining environments, is the rock drills or machinery used for installation. Hard rock mines mostly use hand-held airlegs with limited thrust, low torque, and rotation speed, relative to coal mine mechanised bolters. Resin bolt development for hard rock mines was, and still is today, predominantly focussed on compensating for the 'shortfalls' of using hand-held airlegs. At face value, hydro-powered rock drills, which are more powerful than traditional handheld equipment, provided hard rock mines with a means to attain more consistent and reliable resin bolt installations. This paper assesses the quality and performance of hydro-powered resin bolting at an intermediate to deep level platinum mine in South Africa and its potential contribution to rock-related instabilities when applied erroneously. The findings of this paper necessitate a revision of current quality control and quality assurance measures related to resin bolting for underground support.

Palavras-chave : hydro power; underground support; resin bolting; pull test; encapsulation; load transfer.

        · texto em Inglês     · Inglês ( pdf )