Resumo

MAKONESE, M.  e  SOLE, K.C.. Removal of iron from vanadium redox flow battery electrolyte using ion exchange. J. S. Afr. Inst. Min. Metall. [online]. 2024, vol.124, n.12, pp.747-754. ISSN 2411-9717.  https://doi.org/10.17159/2411-9717/bm20/2024.

Bushveld Belco is commissioning a plant for production of electrolyte used in vanadium redox flow batteries. Owing to the source material, the electrolyte is contaminated with Fe, at concentrations up to 140 mg/L, which negatively affects battery performance. This study examined the use of ion exchange to reduce the Fe concentration to the target value of < 100 mg/L from a feed solution containing 100 g/L V in 4 M H2SO4. Four resins with possible application were identified: Puromet MTS9570, Puromet MTX7010, Puromet MTS9500, and Puromet MTC1600H. Puromet MTS9570 outperformed the other three resins in all batch experiments with respect to loading capacity and selectivity over V, and was evaluated for Fe removal in fixed-bed column loading tests. Based on these data, preliminary sizing and design of a full-scale column was undertaken. Owing to the difficulty of eluting this resin, a philosophy of discarding the resin on loading to full capacity was considered. These data revealed that, despite the high selectivity of this resin for Fe over V, it would be too expensive and impractical to use this resin for full-scale operation under such conditions. It is recommended to remove iron earlier in the flowsheet prior to generation of the 4 M H2SO4 electrolyte.

Palavras-chave : Vanadium redox flow battery; iron; ion exchange; Puromet MTS9570.

        · texto em Inglês     · Inglês ( pdf )