Abstract

ISAAC, K.  and  BADA, S.O.. Co-firing of high-ash discard coal and refuse-derived fuel - ash and gaseous emissions. J. S. Afr. Inst. Min. Metall. [online]. 2022, vol.122, n.8, pp.451-460. ISSN 2411-9717.  https://doi.org/10.17159/2411-9717/2015/2022.

This research focuses on the co-firing of discard coal with refuse-derived fuel (RDF) to utilize this abundant resource in South Africa for energy generation and reduce the volume of waste disposed of at landfills. The potential of a coal with a high ash content (> 40%), which is a grade used in some power stations in South Africa, and its combustion compatibility with two different RDFs in terms of emission reductions has been established. Gaseous emissions and ash residues from the combustion and co-combustion of the coal, two different RDFs and coal/RDF blends of different proportion were analysed. One of the RDF samples contained mostly paper (PB) and the other mostly plastic (PL). Co-combustion ash from the discard coal and RDFs showed a decrease in chloride and alkali metal contents as the coal ratio in the blend increased. The slagging propensity of the co-fired blends was found to be very low, while the propensity for fouling decreased from high to medium for all the blends with < 75% RDF. Co-combustion of RDF with coal showed a decrease in SO₂ emissions from 387 ppm (discard coal) to 50 ppm for the sample containing 25% coal discard plus 75% PL. A 15% PL to 85% coal blend also reduced NO_x emissions from 145 ppm (100% PL) to 88 ppm. The lowest CO₂ emission observed was 6000 ppm for the blend of 85% discard coal plus 15% PB. It was established that the most favourable fuel blend that can produce the lowest sulphur emissions if used for power generation is the 25% coal discard plus 75% PL sample.

Keywords : ash; co-combustion; discard coal; emissions; refuse-derived fuel.

        · text in English     · English ( pdf )