SciELO - Scientific Electronic Library Online

 
vol.53 issue2Characterising the ductility and fatigue crack resistance potential of asphalt mixes based on the laboratory direct tensile strength testEstimation of extreme flood peaks by selective statistical analyses of relevant flood peak data within similar hydrological regions author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Article

Indicators

Related links

  • On index processCited by Google
  • On index processSimilars in Google

Share


Journal of the South African Institution of Civil Engineering

On-line version ISSN 2309-8775
Print version ISSN 1021-2019

Abstract

MOHANRAJ, E K; KANDASAMY, S  and  MALATHY, R. Behaviour of steel tubular stub and slender columns filled with concrete using recycled aggregates. J. S. Afr. Inst. Civ. Eng. [online]. 2011, vol.53, n.2, pp.31-38. ISSN 2309-8775.

This paper is based on a study that was done by utilising construction and demolition debris that had been effectively recycled, in structural members. The steel tubular columns were filled with different types of waste material, as well as recycled aggregate concrete, instead of normal conventional concrete. The results were subsequently analysed. The behaviour of circular and square concrete-filled steel tubular sections (CFSTs) under axial load, in which coarse aggregate had been partially replaced by recycled aggregates, is presented. The effects of steel tube dimensions, shapes and the confinement of concrete are also examined. Measured column strengths are compared with the values predicted by Eurocode 4, Australian Standards and American Codes. Twelve specimens were tested with 20 MPa concrete and steel sections with diameter-to-thickness ratios of 18,5, 25,3 and 36,0. The columns were of two different shapes - a circular-shaped set with diameters of 76 mm and 89 mm, and a square-shaped set with sizes 72 mm and 91 mm. The circular-shaped columns of 76 mm diameter and the square-shaped columns with 72 mm diameter are 900 mm long. The circular columns with a diameter of 89 mm and the square columns of 91 mm diameter are 350 mm long. Eurocode 4 (EC4) gives the best estimation for both conventional and recycled aggregate concrete. However, the American Concrete Institute (ACI) / Australian Standards (AS) equation predicted lower values than measured during the experiments. Hence the ACI/AS equation has been modified by introducing a multiplying factor 'k' to predict good results for columns of L/D < 12. The values of k factor for L/D ratio varying from 4 to 12 are suggested in this study. From the results it has been noted that square columns save 30% of steel when compared with circular columns. It was also observed that the ultimate load of steel tubular columns filled with recycled aggregate concrete is higher than that of conventional concrete and columns filled with recycled aggregate concrete, and can result in a 10% saving in the cost of concrete. This research therefore proposes a solution for effective solid waste management, which will also prove to be cost effective.

Keywords : Composite column; recycled aggregate concrete; steel tubular sections; stub column; slender column.

        · text in English     · English ( pdf )

 

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License