SciELO - Scientific Electronic Library Online

SciELO - Scientific Electronic Library Online

Article References

HAAS, T N; MAINOON, P  and  DUNAISKI, P E. Estimation of the maximum end buffer impact force for a given level of reliability. J. S. Afr. Inst. Civ. Eng. [online]. 2012, vol.54, n.1, pp. 63-68. ISSN 1021-2019.

    ABAQUS, Personal communication and www.abaqus.com [ Links ]

    Ang, H S & Tang, W H 1990. Probability Concepts in Engineering Planning and Design, Vol. 2 - Decision, Risk, and Reliability. New York: Wiley. [ Links ]

    Association of Steel and Iron Engineers (AISE) 2000. Specification for electric overhead travelling cranes for steel mill service. Technical Report 6, Clause 3.8, pp 48-49. [ Links ]

    DEMAG. Personal communication and www.demag.com European Committee for Standardisation 1991. EN 1991-3:2003, EUROCODE 1 - Actions on structures, Part 3: Actions induced by cranes and machinery. CEN/TC250/SC1, Clause 2.11.1, pp 1-44. [ Links ]

    Haas, T N 2007. Numerical (FEA) evaluation of crane end buffer impactforce. PhD thesis, Department of Civil Engineering, Structural Division, Stellenbosch University. [ Links ]

    Larson, R, Hostetler, R & Edwards, B 1995. Calculus, Early Transcendental Functions, 1st edition. Lexington, Mass, US: D.C. Heath and Co, pp 914-919. [ Links ]

    Montgomery, D & Runger, G 2002. Applied Statistics and Probability for Engineers, 3rd edition. New York: Wiley, pp 109-112. [ Links ]

    South African Bureau of Standards. 1989. SABS 01601989 (as amended 1990): Code of Practice: thegeneral procedure and loadings to be applied in the design of buildings. Clauses 5.7.6 and 5.7.7, pp 95-100. [ Links ]

    South African Bureau of Standards. SANS 10160-6: Working document on SANS 10160-6: Basis of structural design and actions for buildings and industrial structures. Section 10: Action induced by cranes and machinery. Personal communication with a member of the Working Group, Clause 10.2.12.1, pp 1-26. [ Links ]

    Standards Australia. 1994. AS 1418.1:1994: Cranes (including hoists and winches). Part 1: General requirements, 3rd edition. Clause 4.7.5, pp 24-26. [ Links ]

    Standards Australia. 2001. AS 1418.18:2001, Cranes (including hoists and winches). Part 18: Crane runways and monorails. Appendix B, p 41. [ Links ]