POTVIN, Y.; DIGHT, P.M.
WESSELOO, J.. Some pitfalls and misuses of rock mass classification systems for mine design. J. S. Afr. Inst. Min. Metall. [online].
vol.112, n.8, pp. 01-06.
Barton, N.R. 1995. The influence of joint properties in modelling jointed rock masses. Keynote lecture, Eighth International Society for Rock Mechanics Congress, Tokyo, Japan, A.A. Balkema, The Netherlands. vol. 3. pp. 1023-1032. [ Links ]
Barton, N.R. 2007. Future directions for rock mass classification and characterization - Towards a cross-disciplinary approach. Invited lecture. Proceedings of the 1st US-Canada Rock Mechanics Symposium,, Vancouver. [ Links ]
Bieniawski, Z.T. 1974. Estimating the strength of rock materials. Journal of the South African Institute of Mining and Metallurgy, vol. 74, no. 8. pp.312-320. [ Links ]
Bieniawski, Z.T. 1976. Rock mass classification of jointed rock masses. Exploration/or Rock Engineering, Johannesburg, South Africa. Balkema, The Netherlands.pp. 97-106. [ Links ]
Bieniawski, Z.T. 1989. Engineering Rock Mass Classifications. John Wiley & Sons, New York. pp. 251. [ Links ]
Institution (BSI), London.,p. 147. Cai, M., Kaiser, P.K., Uno, H., Tasaka, Y., and Minami, M. 2004. Estimation of rock mass strength and deformation modulus of jointed hard rock masses using the GSI system. International Journal of Rock Mechanics and Mining Sciences, vol.41, no. 1. pp. 3-19. [ Links ]
Dight, P.M. and Bogacz, W. 2009. The application of a deposit tectogenesis in pit slope geotechnical engineering: A case example. Proceedings of the 2009 International Symposium on Rock Slope Stability in Open Pit and Civil Engineering, 7-8 November 2009, Santiago, Chile. [ Links ]
Elmo, D.M., Yan, M., Stead, D,. and Rogers, S.F. 2007. The importance of intact rock bridges in the stability of high rock slopes - Towards a quantitative investigation using and integrated numerical modelling; discrete fracture network approach. Proceedings of the 2007International Symposium on Rock Slope Stability in Open Pit Mining and Civil Engineering, 12-14 September 2007, Perth, Australia. [ Links ]
Grimstad, E. and Barton, N. 1993. Updating the Q-system for NMT. Proceedings of the International Symposium on Sprayed Concrete - Modern Use of Wet Mix Sprayed Concrete for Underground Support. Fagernes, Kompen, P., Opsahl, O.A., and Berg, K. (eds). Oslo, Norwegian Concrete Association. [ Links ]
Hadjigeorgiou, J. and Harrison, J.P. 2011. Uncertainty and sources of error in rock engineering. Harmonising Rock Engineering and the Environment. 14 September 2011, CRC Press. Qihu Qian (ed.). Chinese Academy of Engineering, China; Yingxin Zhou, Defence Science and Technology Agency, Singapore. [ Links ]
Hoek, E. and Brown, E.T. 1980. Underground Excavations in Rock. The Institution of Mining and Metallurgy, London, UK, 526 pp. Hoek, E., Kaiser, P.K., and Bawden, W.F. 1995. Support in Underground Excavations in Hard Rock. Balkema, USA. p. 49 and p. 162. [ Links ]
[ Links ]
Hoek, E., Marinos, P., and Benissi, M. (1998) Applicability of the geological strength index (GSI) classification for weak and sheared rock masses: The case of the Athens schist formation. Bulletin of Engineering Geoology and the Environment, vol. 57, no. 2. pp. 151-160. [ Links ]
Hutchinson, D.J. and Diederichs, M.S. 1996. Cablebolting in Underground Mines. B.Tech Publishers, Richmond BC, Canada. p. 184. Laubscher, D.H. and Taylor, H.W. 1976. The importance of geomechanics classification of jointed rock masses in mining operations. Explorationfor Rock Engineering, A.A. Balkema, Cape Town, 1. pp. 119-128. [ Links ]
[ Links ]
Mathews, K.E., Hoek, E., Wyllie, D.C., and Stewart, S.B.V. 1981. Prediction of stable excavations for mining at depth below 1000 metres in hard rock. CANMETReport. Department of Energy, Mines and Resources, Ottawa. [ Links ]
Milne, D. 2007. Problems with rock mass classification for empirical and numerical design. Proceedings of the International Workshop on Rock Mass Classification in Underground Mining. Publication No. 2007-128. National Institutefor Occupational Safety and Health (NIOSH), Atlanta, Georgia., 8 pp. [ Links ]
Mostyn, G. and Douglas, K. 2000. Strength of intact rock and rock masses. Proceedings of. GeoEng 2000, Melbourne, Australia. Australian Geomechanics Society. pp. 1389-1321. [ Links ]
Palmström, A. 1982. The volumetric joint count - a useful and simple measure of the degree of rock jointing Proceedings of the 4th Congress of the International Association of Engineering Geology, Delhi. pp. 221-228 [ Links ]
Potvin, Y. 1988. Empirical stope design in Canada. PhD thesis. Department of Mining and Minerals Processing, University of Bristish Columbia. [ Links ]
Robertson, A.M., Olsen, R.S., and Pierce, G.L. 1987. Assessment of weak altered rock, passes at the Island Copper Mine. SME Annual Meeting, Denver, Colorado. Society of Mining Engineers. [ Links ]