SciELO - Scientific Electronic Library Online

SciELO - Scientific Electronic Library Online

Article References

KAHRAMAN, S; FENER, M  and  KOZMAN, E. Predicting the compressive and tensile strength of rocks from indentation hardness index. J. S. Afr. Inst. Min. Metall. [online]. 2012, vol.112, n.5, pp. 331-339. ISSN 0038-223X.

    1. SZWEDZICKI, T. Draft ISRM suggested methods for determining the indentation hardness index of rock materials. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol. 35, 1998. pp. 831-835. [ Links ]

    2. CHEATHAM, J.B. An analytical study of rock penetration by a single bit-tooth. 8th Annual Drilling and Blasting Symposium, University of Minnesota, 1958. pp. 1-21. [ Links ]

    3. GNIRK, P.F. and CHEATHAM, J.B. Indentation experiments on dry rocks under pressure. Journal of Petroleum Technology, September, 1963. pp. 1031-1039. [ Links ]

    4. PAUL, B. and SIKARSKIE, D.L. A preliminary theory of static penetration by a rigid wedge into a brittle material. 7th Symposium on Rock Mechanics, Pennsylvania State University, 1965. pp. 119-148. [ Links ]

    5. CHEATHAM, J.B. and PITTMAN, R.W. Plastic limit analysis applied to a simplified drilling problem. ISRM, Proceedings of. 1st Congress, Lisbon, vol.2, 1966. pp. 93-97. [ Links ]

    6. HARTMAN, H.L. The effectiveness of indexing in percussion and rotary drilling. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol. 6, 1966. pp. 265-278. [ Links ]

    7. GNIRK, P.F. An experimental study of indexed single bit-tooth penetration into dry rock at confining pressures of 0 to 7500psi. ISRM, Proceedings of. 1st Congress, Lisbon, vol. 2, 1966. pp. 121-129. [ Links ]

    8. PARISEAU, W.G. and FAIRHURST, C. The force-penetration characteristic for wedge penetration into rock. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol. 14, 1967. pp. 165-180. [ Links ]

    9. MILLER, M.H. and SIKARSKIE, D.L. On the penetration of rock by three-dimensional indentors. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol. 5, 1968. pp. 375-398. [ Links ]

    10. BENJUMEA, R. and SIKARSKIE, D.L. A note on the penetration of a rigid wedge into a nonisotropic brittle material. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol. 6, 1969. pp. 343-352. [ Links ]

    11. MORRIS, R.I. Rock drillability related to a roller cone bit. Society of Petroleum Engineers, Paper No. 2389, 1969. pp. 79-83. [ Links ]

    12. LUNDBERG, B. Penetration of rock by conical indentors. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol. 11, 1974. pp. 209-214. [ Links ]

    13. PANG, S.S., GOLDSMITH, W., and HOOD, M. A force-indentation model for brittle rocks. Rock Mechanics and Rock Engineering, vol. 22, 1989. pp. 127-148. [ Links ]

    14. BILGIN, N., ESKIKAYA, S., and DINCER, T. The performance analysis of large diameter blast hole rotary drills in Turkish Coal Enterprises. 2nd International Symposium on Mine Mechanization and Automation. Rotterdam, Balkema, 1993. pp. 129-135. [ Links ]

    15. KAHRAMAN, S., BALCI, C., YAZICI, S., and BILGIN, N. Prediction of the penetration rate of rotary blast hole drills using a new drillability index. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol. 37, 2000. pp. 729-743. [ Links ]

    16. COPUR, H., BILGIN, N., TUNCDEMIR, H., and BALCI, C. A set of indices based on indentation tests for assessment of rock cutting performance and rock properties. Journal of The South African Institute of Mining and Metallurgy, vol. 103, no. 9, 2003. pp. 589-600. [ Links ]

    17. KAHRAMAN, S. and GUNAYDIN, O. Indentation hardness test to estimate the sawability prediction of carbonate rocks. Bulletin of Engineering Geology and the Environment, vol. 67, 2008. pp. 507-511. [ Links ]

    18. YAGIZ, S. Assessment of brittleness using rock strength and density with punch penetration test. Tunnelling and Underground Space Technology, vol. 24, 2009. pp. 66-74. [ Links ]

    19. SZWEDZICKI, T. The indentation hardness testing of rock. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol. 35, 1998. pp. 825-829. [ Links ]

    20. SHEOREY, P.R. Empirical Rock Failure Criteria, Rotterdam, A.A. Balkema, 1997. 176 pp. [ Links ]