SciELO - Scientific Electronic Library Online

 
vol.121 issue3Cleaning Up author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Article

Indicators

Related links

  • On index processCited by Google
  • On index processSimilars in Google

Share


Journal of the Southern African Institute of Mining and Metallurgy

On-line version ISSN 2411-9717
Print version ISSN 2225-6253

J. S. Afr. Inst. Min. Metall. vol.121 n.3 Johannesburg Mar. 2021

 

JOURNAL COMMENT

 

 

 

The five papers in this edition cover a wide range of topics from computationally effective stope layouts to the bulk chemistry of critical elements in a waste product. The papers have been submitted by authors from South Africa (2), Canada, Kenya and Germany and I have tried to summarize them here.

The paper by Lohmeier, which examines the potential of copper slag from historic smelting operations at Tsumeb as a source of critical elements, describes the project and case study which was supported by the German Federal Ministry of Education and Research. 'Mineral resources and mineral reserves report readability and textual choice' by Du Toit and Delport recommends the consideration of adding a plain language requirement to improve the informational value of these reports. An awareness that certain textual choices can affect the interpretation of these reports is highlighted.

The research paper by Kiamba et al. on the prediction of rock fragmentation, presents data collected in a case study from two limestone quarries in Kenya. A particular empirical model was selected and shown to be a valuable instrument for pre surveying the impact of varying certain parameters of a blast plan.

The paper on stope layout optimisation by Sari and Kumral from McGill University, Canada, showed that a cluster based iterative approach generates near optimal stope layouts in a computationally effective manner.

Of particular interest to me was the paper on the evaluation of polymer binders for the briquetting of coal fines by a group from the Centre of Excellence in carbon-based fuels. Northwest University. Potchefstroom. A solution as to how to deal with coal fines has dogged and evaded the coal industry worldwide. This topic has been researched extensively over the past 15 years or so and briquettes of an acceptable physical standard can be produced, albeit at a cost. What has yet to be demonstrated is the economic uses for the briquettes and particularly the combustion products and characteristics.

This selection of papers again highlights the diverse nature of the subject matter that the Journal is pleased to publish. Enjoy the read.

D. Tudor

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License