TRANSACTION PAPER

 

A structured approach to the evaluation of the energy requirements of HPGR and SAG mill circuits in hard ore applications

 

 

P. Rosario^{I, II}; R. Hall^II

^IAMEC Americas Ltd., Mining and Metals, Vancouver, Canada and University of British Columbia
^IIUniversity of British Columbia Norman B, Keevil Institute of Mining Engineering

 

 

---

SYNOPSIS

The application of high pressure grinding rolls (HPGR) has been growing in the mining industry for the last 10 to 15 years. The major benefits supporting this trend are better energy efficiency, improved grinding capacity, and higher metal recovery in downstream processes such as heap leaching and flotation.
In general there is limited quantitative knowledge on the true benefits of HPGRs relative to SAG mills in comminution, and about which situations one deals with better than the other. This paper will present a structure for comparison of the energy requirements for HPGR versus SAG mill considering complete circuits for comminution of precious and base metals hard ores. The work presented is from the design of four complete circuits based on ore data from two sites.

---

 

 

“Full text available only in PDF format”

 

 

References

AMEC. Feasibility Study Review Report. Base metal mining project in Canada. Nov. 2006. (unpublished). 2006.         [ Links ]

AMEC. Pre-feasibility Study Report. Precious metal mining project in USA. Nov. 2006. (unpublished). 2007.         [ Links ]

Andersen, J.A. and Napier-Munn, T.J. Power Prediction for Cone Crushers. Mill Operators' Conference, Cobar. 1988.         [ Links ]

BEARMAN, R. High-Pressure Grinding Rolls- Characterising and Defining Process Performance for Engineers. Advances in Comminution, Kawatra K.S. (ed.). Society for Mining, Metallurgy, and Exploration (SME), 2006. pp. 3-14.         [ Links ]

Bond, F.C. Lab Equipment and Tests Help Predict Metal Consumption in Crushing and Grinding Units, Engineering and Mining Journal, vol. 165, June . pp. 169-176.         [ Links ]

Broeckmann, C. and Gardula, A. Developments in High-Pressure Grinding Technology for Base and Precious Metal Minerals Processing. Proceedings of the 37th Annual Meeting of the Canadian Mineral Processors, January 18-20, 2005, Ottawa, Canada.         [ Links ]

Daniel, M.J. and Morrell, S. HPGR Model Verification and Scale-up. Minerals Engineering, vol. 17, 2004. pp. 1149-116.         [ Links ]

Gunter, H., Muller, M., and Sonntag, P. The Application of Roller Presses for High Pressure Comminution. Symposium on Grinding Processes, February 14-15, 1996 Toulouse, France.         [ Links ]

Humphries, G., Rule, C., and Wolmarans, E. The Development of a Process Flowsheet for the New Anglo Platinum, PPRust North Concentrator, Incorporation HPGR Technology. International Platinum Conference 'Platinum Surges Ahead'. The Southern African Institute of Mining and Metallurgy. 2006.         [ Links ]

JKSimMet®. JKSimMet® Steady State Mineral Processing Simulator-User Manual. JKTech, Queensland, Australia. 2004.         [ Links ]

Kaja, D.M. BRUNO: Metso Minerals' Plant Simulator. Mineral Processing Plant Design, Practice and Control, Mular, A., Baratt, D., and Halbe, D. (eds.). Society for Mining, Metallurgy, and Exploration (SME), vol. 1, 2002. pp. 404-420.         [ Links ]

Kavetsky, A. Hydrocyclone modelling and scaling. JKMRC report to AMIRA, Nov. 1979. 1979.         [ Links ]

Klymowsky, R., Patzelt, N., Knecht, J., and Burchardt, E. An Overview of HPGR Technology. Proceedings of the SAG Conference, Vancouver, B.C., 23-27 September 2006, vol. 4, pp. 11-26.         [ Links ]

Norman, T.E. and Decker, J.D. Tumbling Mill Characteristics. SME Mineral Processing Handbook. Weiss, N.L. (ed.), vol. 1, section 3C, chapter 1, 1985. pp. 3C-3 to 3C-26.         [ Links ]

Morley, C. Flowsheets for HPGR. Proceedings of the SAG Conference, Vancouver, B.C., 23-27 September 2006, vol. 4, 2006. pp. 172-189.         [ Links ]

Morrell, S., Lim, W.I.L., Tondo, L.A., and David, D. Modelling the High Pressure Grinding Rolls. Mining Technology Conference, 1996. pp. 169-176.         [ Links ]

Pokrajcic, Z. and Morrison, R. Evaluation by Simulation of Grinding Circuit Options to Improve Eco-Efficiency. MEI Comminution'08 Conference, Falmouth, Cornwall, UK, June 17-20 2008.         [ Links ]

Schonert, K. A First Survey of Grinding with High-compression Roller Mills. International Journal of Mineral Processing, vol. 22, 1988. pp. 401-412.         [ Links ]

Schonert, K. Advances in Comminution Fundamental, and Impacts on technology. XVII International Mineral Processing Congress, Dresden, September 23-28, 1991, vol. 1, pp. 1-21.         [ Links ]

Sullivan, J. and Oliva, M. Greenhouse Gases an Effective Strategy for Managing GHG Emissions. Chemical Engineering, Aug. 2007, pp. 34-40.         [ Links ]

Valery, W. and Jankovic, A. The Future of Comminution. Proceedings of 34th IOC on Mining and Metallurgy Conference, 30 September-3 October 2002, Bor Lake, Yugoslavia.         [ Links ]

Vanderbeek, J. State of the SAG. Proceedings of Plant Operators' Forum 2004, Society for Mining, Metallurgy, and Exploration (SME), 2004. pp. 141-145.         [ Links ]

Vanderbeek, J. HPGR Implementation at Cerro Verde. Proceedings of the SAG Conference, Vancouver, B.C., 23-27 Sept. 2006, vol. 4, pp. 45-61.         [ Links ]

von Michaelis, H. Real and Potential Metallurgical Benefits of HPGR in Hard Rock Ore Processing. Proceedings of the Randol Innovative Metallurgy Forum, Perth, W.A., Australia, 21-24 Aug. 2005, pp. 31-39.         [ Links ]

Walsh, H. Chile Power Crunch May Cut Copper Output. Spur Record (Update2). Bloomberg.com: Energy, 9 Apr. 2008, URL. http://www.bloomberg.com/apps/news?pid=20601086&sid=aJlEuFVIVRbs&refer=news.2008.         [ Links ]