JOURNAL PAPER

 

Improving the safety performance of the UK quarrying industry through a behavioural based safety intervention

 

 

P.J. Foster^I; A. Parand^II; J.G. Bennett^I

^ICamborne School of Mines, University of Exeter, UK
^IISt Mary's Hospital, Imperial College, UK

 

 

---

SYNOPSIS

This paper summarizes a behavioural safety project undertaken in seven quarries in the UK in order to investigate its applicability as a means of raising the standards of health and safety in the UK quarrying industry. A behavioural safety methodology was developed and trialed at two quarry sites in the UK. During the study the number of unsafe acts and minor accidents had decreased and at one of the quarries there was a 95% reduction in the number of working days lost. It was then introduced at a further five sites of varying sizes and within this focused specifically on lone workers as well as behaviours that affected quality and environmental issues. Positive improvements were noted in most of these operations. The project also looked at the effectiveness of health and safety performance indicators. Here, the common lead and trailing indicators for both safety and health that are commonly used by industry were identified. In consultation with the UK quarrying industry these were then used to identify specific performance measurement criteria that can be used by the quarrying sector to measure performance. Following on from this, a quarry specific health and safety management system specification was developed for large and small quarries.

---

 

 

“Full text available only in PDF format”

 

 

References

BENNETT, J. and FOSTER, P. Predicting progress: the use of leading indicators in occupational safety and health. Policy and Practice in Health and Safety, UK: Institution of Occupational Safety and Health; vol. 3, no. 2, 2005. pp. 77-90.         [ Links ]

BENNETT, J. and FOSTER, P.J. Developing an industry-specific approach to a safety management system. Policy and Practice in Health and Safety; vol. 5, no. 1, 2007. pp. 37-59.         [ Links ]

COX, S., JONES, B. and RYCRAFT, H. Behavioural approaches to safety management within UK reactor plants, Safety Science, vol. 42, no. 9, 2004. pp. 825-839.         [ Links ]

FOSTER P.J. and PEARCE, R. Hard Targets: Improving Safety in the UK Quarrying Industry, Minesafe International 2003, Perth, Western Australia.         [ Links ]

FOSTER, P.J. PARAND, A. and BENNETT. J.G. Improving Standards of Health & Safety Management in the Quarry Sector, MIST Report MA4.0.06, Minerals Industry Research Organisation. 2007.         [ Links ]

FOX, D.K., HOPKINS, B.L., and ANGER, W.K. The Long-Term Effects of a Token Economy on Safety Performance in Open-Pit Mining, Journal of Applied Behavior Analysis, vol. 20, 1987. pp. 215-224.         [ Links ]

GALLAGHER, C. Health & Safety Management Systems: An Analysis of System Types and Effectiveness; National Key Centre in Industrial Relations for the National Occupational Health & Safety Commission, Commonwealth of Australia, 1997.         [ Links ]

GELLER, E.S., CARTER, N., DEPASQUALE, J., PETTINGER, C., and WILLIAMS, J. Applications of Behavioral Science to Improve Mine Safety, M. Karmis (ed.), Concepts and Processes in Mine Health and Safety Management, Society for Mining, Metallurgy, and Exploration, Inc. 2001.         [ Links ]

GUASTELLO, S.J. Do We Really Know How Well Our Occupational Accident Prevention Programs Work?, Safety Science, vol. 16, 1993. pp. 445-463.         [ Links ]

HICKMAN, J.S. and GELLER, S.E. A Safety Self-Management Intervention for Mining Operations, Journal of Safety Research, vol. 34, 2003. pp. 299-308.         [ Links ]

IYER, P.S., HAIGHT, J.M., DEL CASTILLO, E., TINK, B.W. and HAWKINS, P.W. Intervention Effectiveness Research-Understanding and Optimising Industrial Safety Programmes using Leading Indicators. Chemical Health & Safety Journal; vol. 11, iss. 2; March-April, 2004. pp. 9-19.         [ Links ]

KOMAKI, J., BARWICK, K.D., and SCOTT, L.R. A Behavioral Approach to Occupational Safety: Pinpointing and Reinforcing in a Food Manufacturing Plant, Journal of Applied Psychology, vol. 63, no. 4, 1978. pp. 434-445.         [ Links ]

KRAUSE, T.R. The Behavior-Based Safety Process: Managing Involvement for an Injury-Free Culture, 2nd edition. New York: Van Nostrand Reinhold. 1997.         [ Links ]

KRAUSE, T.R. Myths, Misconceptions, and Wrong-headed Ideas About Behavior-Based Safety Why Conventional Wisdom is Usually Wrong, white paper by Behavioural Science and Technology Inc. 2002.         [ Links ]

MCCLURE, J. Should you be your own Consultant?; Industrial Safety and Hygiene News; BNP Media; May 12th, 2000.         [ Links ]

MCAFEE, R.B. and WINN, A.R.. The Use of Incentives/Feedback to Enhance Work Place Safety: A Critique of the Literature. Journal of Safety Research, vol. 20, 1989. pp. 7-19.         [ Links ]

OLSON, R. and AUSTIN, J. Behavior-Based Safety and Working Alone; The Effects of a Self-Monitoring Package on the Safe Performance of Bus Operators, Journal of Organizational Behavior Management, vol. 21, no. 3, 2001. pp. 5-43.         [ Links ]

PARAND, A. and FOSTER, P.J. Behavioural-Based Safety in the Minerals Industry: A Research Based Methodology Carried out in the UK Quarrying Sector, Queensland Resources Council Mining Health & Safety Conference 2006, Townsville, August.         [ Links ]

PARAND, A. and FOSTER, P.J. Improving the Safety of Lone Workers in Quarrying Operations through Behavioural Safety Interventions, MIST Report MA6.2.02, Minerals Industry Research Organisation. 2008.         [ Links ]

REBER, R.A., WALLIN, J.A., and CHHOKAR, J. Reducing Industrial Accidents: A Behavioural Experiment. Employee Relations, vol. 23, 1984. pp. 215-224.         [ Links ]

RHOTON, W. A Procedure to Improve Compliance with Coal Mine Safetv Regulations, Journal of Organizational Behavior Management, vol. 2, no. 4, 1980. pp. 243-249        [ Links ]

TALBOT, C.F., MASON, S. VON GLEHN, F.H., LOMAS, R.H. and SIMPSON, G.C. Improve the Safety Of Workers by Investigating the Reasons Why Accepted Safety and Work Standards are not Complied With on Mines. SIMRAC, International Mining Consultants Ltd. Project No. GEN 213. 1996.         [ Links ]

VAN DER BERGH. Leading and Trailing Indicators-Occupational Safety; ISSA / Chamber of Mines Conference 2003 - Mines & Quarries: Prevention of Occupational Injury and Disease, SAIMM Symposium Series S32.         [ Links ]