JOURNAL PAPER

Applications of electrical tomography to improve the performance of crystallization, precipitation and mixing processes

K.M. Primrose

Industrial Tomography Systems plc., Manchester, UK

SYNOPSIS

Electrical tomography has developed rapidly over the last few years in its sophistication and practical use to enable three-dimensional information on the distribution of phases within flowing mixtures to be observed1. This paper reviews the current state of application from the industrial perspective, drawing on applications case studies based on scaling studies in the laboratory right through to installations on plant. In the laboratory, applications have looked at scale-up of mixing2 processes involving gas-liquid and solid-liquid suspensions3 with a particular interest in verifying computational fluid dynamics simulations or in checking scale-up design4,5. In the processing plant, the circumstances are usually bespoke and may range from simple detection of the degree of homogeneity of a flowing mixture through to the need to measurement a sophisticated batch process such as crystallization, sedimentation, filtering and drying. Examples drawn from the chemical and pharmaceutical industries will be presented and related to the benefits that can be gained through application of the method.

“Full text available only in PDF format”

References

1. WILLIAMS, R.A., and BECK, M.S. (eds.). Process Tomography-Principles, Techniques and Applications, Butterworth-Heinemann (Oxford), 1995, pp. 550.         [ Links ]

2. PULLMAN, L., GRAHAM, L., RUDMAN, M. and HAMILTON, R. High concentration suspension pumping. Minerals Engineering, vol. 19, 2006, pp. 471-477.         [ Links ]

3. WHITE, R. and DOBLIN, C. An investigation of sparged mixing tanks using electrical impedance tomography and computational fluid dynamics, 3^rd International conference on CFD in the minerals and process industries CSIRO, Melbourne, Australia, 10-12 December 2003.         [ Links ]

4. CULLIVAN, J.C. and WILLIAMS, R.A. Velocity, size and shape and concentration measurements of particulate mixtures, Chapter 14.4 in Multiphase Flow Handbook, (ed.), Clayton Crowe, pp. 42-87.         [ Links ]

5. WILLIAMS, R.A. Mineral and material processing, Chapter 11 in Process Imaging for Automatic Control, Scott, D.M. and McCann, H. (eds.), Taylor and Francis, pp. 359-400.         [ Links ]

6. GRIEVE, B., SMIT, Q., MANN, R., and YORK, T. The application of ERT to a large volume production pressure filter, Proceedings of the 2nd World Congress on Industrial Process Tomography, Hannover, Germany, August 2001, pp. 29-31.         [ Links ]

7. DYAKOWSKI, T., MIKO, M., VLAEV, D., MANN, R., FOLLOWS, G., BOXMAN, A., and WILSON, M. Imaging nylon polymerization processes by applying electrical tomography, Proceedings of the 1st World Congress on Industrial Process Tomography, Buxton UK, April 14-16 1999.         [ Links ]

8. WILLIAMS, R., JIA, X., WEST, R., et al., Industrial monitoring of hyrdocyclone operation using electrical resistance tomography, Miner Eng. vol. 12, 1999. pp. 1245-1252.         [ Links ]

9. BOLTON, G., BENNETT, M., WANG, M., and QIU, C. Development of an electrical tomographic system for operation in a remote, acidic and radioactive environment. Chem. Eng. Journal, vol. 130 2007. pp. 165-169.         [ Links ]

10. RICARD, F., BRECHTELSBAUER, C., XU, X.Y., and LAWRENCE, C.J. Monitoring of multiphase pharmaceutical processes using electrical resistance tomography, Chem. Eng. Res. Des., vol. 83, 2005. pp. 794-805.         [ Links ]

11. STANLEY, S. Tomographic imaging during reactive precipitation in a stirred vessel: Mixing with chemical reaction. Chem Eng Sci, vol. 61, 2006. pp. 7850-7863.         [ Links ]

12. STANLEY, S., HRISTOV, H., MANN, R., and PRIMROSE, K. Tomographic imaging of fluid mixing in 3-D for single-feed semi-batch operation of a stirred vessel, Transactions in IChemE 80 (A), 2002. pp. 903-909.         [ Links ]