SciELO - Scientific Electronic Library Online

 
vol.20 número2A heuristic fixed limit Bayesian p chartA genetic algorithm for two dimensional strip packing problems índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • En proceso de indezaciónSimilares en Google

Compartir


South African Journal of Industrial Engineering

versión On-line ISSN 2224-7890
versión impresa ISSN 1012-277X

S. Afr. J. Ind. Eng. vol.20 no.2 Pretoria  2009

 

Modular reconfigurable machine tools: Design, control and evaluation

 

 

J. PadayacheeI; G BrightII; I. MasekamelaIII

ISchool of Mechanical Engineering, University of KwaZulu Natal, South Africa 203505399@ukzn.ac.za
IISchool of Mechanical Engineering, University of KwaZulu Natal, South Africa brightg@ukzn.ac.za
IIICouncil for Scientific and Industrial Research (CSIR), South Africa

 

 


ABSTRACT

The reconfigurable manufacturing system (RMS) paradigm encapsulates methodologies that enable manufacturing systems to cope effectively with market and product changes. This research presents the design and evaluation of modular reconfigurable machine (MRM) tools as a novel machining solution within the scope of RMS. Mechanical and control designs are presented, outlining the development of this novel machining system. The property of hardware modularity displayed by MRMs enables an adjustment of system functionality and the synergistic redistribution of system resources between production streams, thus facilitating inter-process capacity scaling. Scalable production capacity and adjustable system functionality are the key objectives of reconfigurable manufacturing.

Index terms: Reconfigurable Manufacturing Systems, Modular Reconfigurable Machines, Open Architecture Control, Modular Machine Control


OPSOMMING

Die paradigma van 'n herkonfigureerbare vervaardigingstelsel (HVS) bevat metodologieë waarmee vervaardigingstelsels kan tred hou met mark- en produkveranderings. Die navorsing hou die ontwerp en evaluering van modulêre masjiengereedskap voor as 'n nuwerwetse oplossing vir die herkonfigurasievraagstuk. Meganiese- en beheerontwerpe word voorgestel vir die ontwikkeling/ontplooiing van nuwe masjineringstelsels.
Die modulêre eienskappe van 'n HVS werk stelselplooibaarheid in die hand via 'n sinergistiese herdistribusie van stelselbronne aan produksievloeie om sodoende verlangde proseskapasiteit tegemoet te kom.


 

 

“Full text available only in PDF format” 

 

 

REFERENCES

[1] Sung-Yong Son, Tava, Lennon Olsen and Yip-Hoi, Derek. 2001. An approach to scalability and line balancing for reconfigurable manufacturing systems, Integrated Manufacturing Systems, Volume 12, Issue 7.         [ Links ]

[2] Mehrabi, M.G., Ulsoy, A.G., Koren, Y. and Heytler, P. 2002. Trends and perspectives in flexible and reconfigurable manufacturing systems. Journal of Intelligent Manufacturing, Issue 13, pp. 135-46.         [ Links ]

[3] Koren, Yoram. 2004 Reconfigurable manufacturing systems, Proceedings: International Conference On Competitive Manufacturing, COMA '04, pp. 69-79, Stellenbosch, South Africa (February 2004).         [ Links ]

[4] Li. H., Landers. R. and Kota S. 2000. A review of feasible joining methods for reconfigurable machine tool components, Proceedings of the Japan-USA symposium on flexible automation, Pp. 381-388. Ann Arbor, MI, USA.         [ Links ]

[5] Koren, Y., Heisel, U., Jovane, F., Moriwaki, T., Pritschow, G., Ulsoy, G. and van Brussel, H. 1999. Reconfigurable manufacturing systems, Annals of the CIRP, Volume 48/2, pp. 527-540,         [ Links ]

[6] Xu, X.W. and Newman, S.T. 2006. Making CNC machine tools more open, interoperable and intelligent: Review of the technologies, Computers in Industry, Volume 57 Issue 2 (February 2006), pp. 141-152.         [ Links ]

[7] Setchi, R.M. and Lagos, N. 2004. Reconfigurability and reconfigurable manufacturing systems: State-of-the-art review, Industrial Informatics, 2nd IEEE International Conference, 24-26 June 2004, pp. 529-535.         [ Links ]

[8] Landers, R.G., Min, B.K. and Koren, Y. 2001. Reconfigurable machine tools, CIRP Annals - Manufacturing Technology, Volume 50 Issue 1, pp.269-274.         [ Links ]

[9] Mehrabi, M.G., Ulsoy, A.G. and Koren, Y. 2000. Reconfigurable manufacturing systems and their enabling technologies, International Journal of Manufacturing Technology and Management, Vol. 1 No. 1, pp. 113-130.         [ Links ]

[10] Moon, Yong-Mo and Kota Sridhar. 2002. Design of reconfigurable machine tools, Journal of Manufacturing Science and Engineering Volume 124 Issue 2 (May 2002), pp. 480-483.         [ Links ]

[11] Tilbury, D.M. and Kota S. 1999. Integrated machine and control design for reconfigurable machine tools, Proceedings: Advanced Intelligent Mechatronics, 1999 IEEE/ASME International Conference, pp. 629-634.         [ Links ]

[12] Katz, R. and Moon, Y.-M. 2000. Virtual arch type reconfigurable machine tool design. The University of Michigan, Ann Arbor, USA.         [ Links ]

[13] Kommareddy, S., Kazuo, Y. and Yoshihito. K. 2000. PC-based open architecture servo controller for CNC machining, Proceedings of the Second Real-Time Linux Workshop, Orlando, USA (20-27 November 2000).         [ Links ]

[14] Sperling, Wolfgang and Lutz, Peter. 1997 Designing applications for an OSACA control, Proceedings of the International Mechanical Engineering Congress and Exposition (The ASME Winter Annual Meeting). Dallas/USA, November 16-21, 1997        [ Links ]

[15] Atta-Konadu, R. 2006. Design and implementation of a modular controller for robotic machines. Doctoral thesis, University of Saskatchenwan.         [ Links ]

[16] Crandell, C.M. 2003. CNC machining and programming: An introduction. 2nd edition. Industrial Press Inc, New York.         [ Links ]

[17] Padayachee, J., Masekamela, I., Bright, G., Kumile, C. and Tlale, N.S. 2008. Modular reconfigurable machines incorporating open architecture control. 15th International Conference on Mechatronics and Machine Vision in Practice (M2VIP'08), Auckland, New Zealand (2-4 December 2008).         [ Links ]

[18] Abele, Eberhard; Wörn, Arno; Fleischer, Jürgen; Wieser, Jan; Martin, Patrick and Klöpper, Robert. 2007. Mechanical module interfaces for reconfigurable machine tools, Prod. Eng. Res. Devel. 1:421-428.         [ Links ]

[19] Virtual COM port drivers: http://www.ftdichip.com/Drivers/VCP.htm. 02 April 2009        [ Links ]

[20] Shinno, H. and Ito, Y. 1981. Structural description of machine tools 1: Description method and application, Bulletin of the JSME, 24(187):251-258 (January 1981).         [ Links ]

[21] Shinno, H. and Ito, Y. 1981. Structural description of machine tools 2: Evaluation of structural similarity, Bulletin of the JSME, 24(187):259-265 (January 1981).         [ Links ]

[22] Shinno, H. and Ito, Y. 1984. A proposed generating method for the structural configuration of machine tools. ASME Winter Annual Meeting, 1984. ASME paper 84-WA/Prod-22.         [ Links ]

[23] Ouyang, M.A., Yi, C., Li, C. and Zhou, J. 1995. Intelligent layout for modular design of machine tools. SPIE, 2620:547-552.         [ Links ]

[24] Moon, Yong-Mo and Kota, Sridhar. 2002. Generalized kinematic modeling of reconfigurable machine tools, Journal of Mechanical Design, Vol. 124 (March 2002), pp. 47-51.         [ Links ]

[25] Ayman M.A., Youssef, Hoda and ElMaraghy, A. 2006. Assessment of manufacturing systems reconfiguration smoothness, International Journal of Advanced Manufacturing Technology 30: 174-193.         [ Links ]

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons