versão On-line ISSN 2413-3051
versão impressa ISSN 1021-447X
J. energy South. Afr. vol.21 no.3 Cape Town 2010
Sosten Ziuku; Edson L. Meyer
Fort Hare Institute of Technology, University of Fort Hare, Alice, South Africa
A 3.8 kW rooftop photovoltaic generator has been installed on an energy efficient house built at the University of Fort Hare, Alice campus, South Africa. The system, located on the north facing roof, started generating electrical power in February 2009. In addition to providing electrical energy, the photovoltaic panels also act as the building roofing material. An instrumentation and data acquisition system was installed to record the indoor and outdoor ambient temperature, indoor and outdoor relative humidity, wind speed and direction, solar irradi-ance, electrical energy produced by the solar panels and the household energy consumption. This paper presents the initial results of the electrical performance of the building integrated photovoltaics (BIPV) generator and energy consumption patterns in the energy efficient house.
Keywords: building integrated photovoltaics, energy efficiency, energy demand, energy consumption
Full text available only in pdf format.
Bhuiyan, M.M.H., and Ali Asgar M. (2003). Sizing of a stand-alone photovoltaic power system at Dhaka. Renewable Energy 28, p. 929-938. [ Links ]
Chenni, R., Makhlouf, M., Kerbache, T., and Bouzid, A. (2007). A detailed modelling method for PV cells. Energy 32, p. 1724-1730. [ Links ]
Department of Minerals and Energy (DME) (2003). White Paper on Renewable Energy, viewed 10 July 2009 from: www.dme.gov.za/pdfs/energy/renewable/white_paper_renewable_energy.pdf. [ Links ]
Department of Minerals and Energy (DME) (2005). Energy Efficiency Strategy of the Republic South Africa, viewed 10 July 2009 from: www.dme.gov.za/pdfs/energy/efficiency/ee_strategy_05.pdf. [ Links ]
Fanney, A.H., and Dougherty, B.P (2001). Measured performance of building integrated photovoltaic panels, Solar energy: The power to choose, April 21-25, Washington, D.C. [ Links ]
Received 28 October 2009
Revised 7 June 2010