SciELO - Scientific Electronic Library Online

vol.19 número1Experimental results of using a parabolic trough solar collector for thermal treatment of crude oil índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados



Links relacionados

  • En proceso de indezaciónCitado por Google
  • En proceso de indezaciónSimilares en Google


Journal of Energy in Southern Africa

versión On-line ISSN 2413-3051
versión impresa ISSN 1021-447X

J. energy South. Afr. vol.19 no.1 Cape Town  2008


An analysis of a thermal power plant working on a Rankine cycle: A theoretical investigation



R K KapooriaI; S KumarII; K S KasanaII

IDepartment of Mechanical Engineering, BRCM College of Engineering & Technology, Bahal (Haryana) and National Institute of Technology, Kurukshetra, India
IIDepartment of Mechanical Engineering, National Institute of Technology, Kurukshetra, India




Today, most of the electricity produced throughout the world is from steam power plants. However, electricity is being produced by some other power generation sources such as hydropower, gas power, bio-gas power, solar cells, etc. One newly developed method of electricity generation is the Magneto hydro dynamic power plant. This paper deals with steam cycles used in power plants. Thermodynamic analysis of the Rankine cycle has been undertaken to enhance the efficiency and reliability of steam power plants. The thermodynamic deviations resulting in non-ideal or irreversible functioning of various steam power plant components have been identified. A comparative study between the Carnot cycle and Rankine cycle efficiency has been analyzed resulting in the introduction of regeneration in the Rankine cycle. Factors affecting efficiency of the Rankine cycle have been identified and analyzed for improved working of thermal power plants.

Keywords: Rankine cycle, steam-turbine, efficiency, Feed Water Heater (FWH), irreversibility, reheat cycle, regeneration, condensers



Full text available only in pdf format.




Arora, C.P (1998), Thermodynamics, Tata Mc Graw-Hill, New Delhi.         [ Links ]

Ballaney, PL. (1999), Thermal Engineering. Khanna, Delhi.         [ Links ]

Cengel, Y.A., and Boles, M.A. (2003), Thermodynamics . An Engineering Approach, Tata Mc Graw-Hill. New Delhi.         [ Links ]

Drbal, L.F (1996), Power Plant Engineering, Black & Veatch (COR).         [ Links ]

El-Wakil, M. M. (1984), Power Plant Technology. New York: McGraw-Hill.         [ Links ]

Fundamentals of Steam Power,         [ Links ]

Haywood, R.W. (1980), Analysis of Engineering Cycles. Pergamon Press.         [ Links ]

Kiameh, P (2002), Power Generation Handbook, McGraw-Hill Handbooks.         [ Links ]

Li, Kam W., and Priddy, A. Paul (1985), Power plant System Design. New York: Wiley.         [ Links ]

Moran, M.J. and Shapiro H.N. (2000), Fundamentals of Engineering Thermodynamics, John Wiley & Sons (Asia).         [ Links ]

Nag, PK. (1995), Engineering Thermodynamics, Tata Mc Graw-Hill., New Delhi.         [ Links ]

Rajput, R.K. (2001), Thermal Engineering, Laxmi, New Delhi.         [ Links ]

Skrotzi, B. G. A. and Vopat, W. A. (1960), Power Station Engineering and Economy. New York: McGraw-Hill.         [ Links ]

Whalley, PB. (1992), Basic Engineering Thermodynamics, Oxford University Press.         [ Links ].

Wood, B. (1981), Applications of Thermodynamics, 2nd ed. Reading, Mass.: Addison- Wesley.         [ Links ]



Received 2 February 2007; 12 September 2007

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons