SciELO - Scientific Electronic Library Online

 
vol.111 issue5Quantitative study of the hardness property of laser surface alloyed aluminium AA1200A model to predict the performance of roadheaders based on the Rock Mass Brittleness Index author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Journal of the Southern African Institute of Mining and Metallurgy

On-line version ISSN 2411-9717

J. S. Afr. Inst. Min. Metall. vol.111 n.5 Johannesburg May. 2011

 

TRANSACTION PAPER

 

Microstructure and corrosion properties of Al(Ni/TiB2) intermetallic matrix composite coatings

 

 

A.P.I. PopoolaI; S.L. PityanaII; O.M. PopoolaI

ITshwane University of Technology, Pretoria, South Africa
IICenter for Scientific and Industrial Research-National Laser Centre, Pretoria, South Africa

 

 


SYNOPSIS

Laser coatings are used for a wide variety of applications. TiB2/Ni intermetallic matrix composite coatings were fabricated on Alsubstrate by a high power Rofin Sinar Nd: YAG solid-state laser. The characterization of the coatings was carried out by optical microscopy (OM), scanning electron microscopy (SEM/EDS) and Xray Diffraction (XRD). Electrochemical study of the laser coatings in 3.65 per cent NaCl at room temperature revealed that with very high weight proportion of nickel the corrosion resistance of the coatings deteriorated due the presence of AlB10 phase. 50 wt per cent TiB2+50 wt per cent Ni laser coatings exhibited the highest corrosion resistance in test solution.

Keywords: Corrosion, protective film, laser surface alloying, reinforcement


 

 

“Full text available only in PDF format”

 

 

References

1. NURMINEN, J., NAKKI, J., and VUORISTO, P. Microstructure and Properties of Hard and Wear Resistant MMC Coatings Deposited by Laser Cladding. Int. Journal of Refractory Metals and Hard Materials, vol. 27, 2009, pp. 472-478.         [ Links ]

2. MAJUMDAR, J.D., CHANDRA, B.R., NATH, A.K., and MANNA, I. In situ Dispersion of Titanium Boride on Aluminium by Laser Composite Surfacing for Improved Wear Resistance. Surface and Coatings Technology, vol. 201, 2006, pp. 1236-1242.         [ Links ]

3. YUE, T.M., YAN, L.J., CHAN, C.P., DONG, C.F., MAN, H.C., and PANG, G.K.H. Excimer Laser Surface Treatment of Aluminium Alloy AA7075 to Improve Corrosion Resistance. Surface and Coatings Technology, vol. 179, 2004, pp. 158-164.         [ Links ]

4. TJONG, S.C. and HUO, H.W. Corrosion Protection of in situ Al-Based Composite by Cerium Conversion Treatment. Journal of Materials Engineering and Performance, vol. 18, 2009, pp. 88-94.         [ Links ]

5. CHIU, K.Y., CHENG, F.T., and MAN, H.C. Corrosion Behaviour of AISI 316L Stainless Steel Surface-Modified with NiTi. Surface and Coatings Technology, vol. 200, 2006, pp. 6054-6061.         [ Links ]

6. DU, B., ZOU, Z., WANG, X., and QU, S. In situ Synthesis of TiB2/Fe composite coating by Laser Cladding. Materials Letters, vol. 62, 2008, pp. 689-691.         [ Links ]

7. MAN, H.C., YANG, Y.Q., and LEE, W.B. Laser induced reaction synthesis of TiC+WC reinforced metal matrix composites coatings on Al 6061. Surface and Coatings Technology, vol. 185, 2004, pp. 74-80.         [ Links ]

8. MAN, H.C., ZHANG, S., and CHENG, F.T. Improving the Wear resistance of AA 6061 by Laser Surface Alloying with NiTi. Materials Letters, vol. 61, 2007, pp. 4058-4061.         [ Links ]

9. VAZIRI, S.A., SHAHVERDI, H.R., TORKAMANY, M.J., and SHABESTARI, S.G. Effect of Laser Parameters on Properties of Surface-Alloyed Al Substrate with Ni. Optics and Lasers in Engineering, vol. 47, 2009, pp. 971-975.         [ Links ]

10. CHEN, S.P., MENG, Q.S., LIU, W., and MUNIR, Z.A. Titanium Diboride-Nickel Graded Materials Prepared by Field-Activated, Pressure-Assisted Synthesis Process. Journal of Materials Science, vol. 44, 2009, pp. 1121-1126.         [ Links ]

11. XU, J. and LIU, W. Wear Characteristic of in situ Synthetic TiB2Particulate- Reinforced Al Matrix Composite formed by Laser Cladding. Wear 260, 2006, pp. 486-492.         [ Links ]

12. BABU, S.S., KELLY, S.M., MURUGANANTH, M., and MARTUKANITZ, R.P. Reactive Gas Shielding during Laser Surface Alloying for Production of Hard Coatings. Surface and Coatings Technology, vol. 200, 2006, pp. 2663-2671.         [ Links ]

13. CHEN, Y. and WANG, H.M. High-Temperature Wear Resistance of a Laser Clad TiC Reinforced FeAl in situ Composite Coating. Surface and Coating Technology, vol. 179, 2004, pp. 252-256.         [ Links ]

14. MONTICELLI, C., FRIGNANI, A., BELLOSI, A., BRUNORO, G., and TRABANELLI, G. The Corrosion Behaviour of Titanium Diboride in Neutral Chloride Solution. Corrosion Science, vol. 43, 2001, pp. 979-992.         [ Links ]

15. HUO, H. and TJONG, S.C. Corrosion Behaviour of Al-based Composites Containing in situ TiB2, Al2O3 and Al3Ti Reinforcements in Aerated 3.5% Sodium Chloride Solution. Advanced Engineering Materials, vol. 9, no. 7, 2007, pp. 588-593.         [ Links ]

16. XU, W.L., YUE, T.M., and MAN, H.C. Nd:YAG Laser Surface Melting of Aluminium Alloy 6013 for Improving Pitting Corrosion Fatigue Resistance. Journal of Materials Science, vol. 43, 2008, pp. 942-951.         [ Links ]

17. MAN, H.C., ZHANG, S., YUE, T.M., and CHENG, F.T. Laser Surface Alloying of NiCrSiB on Al6061 aluminium alloy. Surface and Coatings Technology, vol. 148, 2001, pp. 136-142.         [ Links ]

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License