SciELO - Scientific Electronic Library Online

 
vol.111 issue3The use of titanium hydride in blending and mechanical alloying of Ti-Al alloysNitriding of ilmenite and high-grade slag fines author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Journal of the Southern African Institute of Mining and Metallurgy

On-line version ISSN 2411-9717

J. S. Afr. Inst. Min. Metall. vol.111 n.3 Johannesburg  2011

 

TRANSACTION PAPER

 

The influence of Mn on the tensile properties of SSM-HPDC Al-Cu-Mg-Ag alloy A201

 

 

H. MöllerI; E.P. MasukuI; U.A. CurleI; P.C. PistoriusII; R.D. KnutsenIII; G. GovenderI

IMaterials Science and Manufacturing, CSIR, Pretoria, South Africa
IIDepartment of Materials Science and Engineering, Carnegie Mellon University, Pittsburgh, USA
IIIUCT Centre for Materials Engineering, Cape Town, South Africa

 

 


SYNOPSIS

A201 aluminium alloy is a high strength casting alloy with a nominal composition of Al-4.6Cu-0.3Mg-0.6Ag. It is strengthened by the Ù(Al2Cu) phase and the è'(Al2Cu) phase during heat treatment. Further strengthening of this alloy system can be obtained through the addition of transition elements, but care must be taken as other elements might have adverse effects on the mechanical properties. The objective of this study is to determine the influence of Mn on the tensile properties of rheo-processed Al-Cu-Mg-Ag alloy A201. ThermoCalc software was used to predict the different phases that can be expected in the alloys, and scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS) was used to investigate the actual phases that formed. The influence of these phases on tensile properties is quantified. SEM and ThermoCalc revealed that there is an increased amount of the Al20Cu2Mn3 with increasing Mn. The tensile properties showed that high amounts of Mn do have adverse effects on the tensile properties of alloy A201, especially the ductility.

Keywords: Semi-solid metal (SSM) forming, alloy A201, intermetallics, Al20Cu2Mn3


 

 

“Full text available only in PDF format”

 

 

References

1. ATKINSON, H.V. Modelling the semisolid processing of metallic alloys, Progress in Materials Science, 2005, vol. 50, p. 341.         [ Links ]

2. CHANG, C-H., LEE, S-L., LIN, J-C., YEH, M-S., and JENG, R-R. Effect of Ag Content and Heat Treatment on the Stress Corrosion Cracking of Al-4.6Cu-0.3Mg Alloy, Materials Chemistry and Physics, 2005, vol. 91, p. 454.         [ Links ]

3. FLEMINGS, M.C. Semi-solid forming: the process and the path forward, Metallurgical Science and Technology, 2000, vol. 18, p. 3.         [ Links ]

4. CASTILLO, L.D. and LAVERNIA, E.J. Microstructural and mechanical behavior of spray deposited Al-Cu-Mg(Ag-Mn) alloys, Metallurgical and Materials Transactions A, 2000, vol. 31A, p. 2287.         [ Links ]

5. CALLISTER, W.D. Materials Science and Engineering: Introduction, John Wiley & Sons, USA, 2003, p. 779.         [ Links ]

6. THE MATERIALS INFORMATION SOCIETY. ASM Speciality Handbook, Aluminium and Aluminium Alloys, 1998, p. 706.         [ Links ]

7. BRUWER, R., WILKINS, J.D., IVANCHEV, L.H., ROSSOUW, P., and DAMM, O.F.R.A. Method of and apparatus for processing of semi-solid metal alloys, US7368690, Appl. 22 Sep 2004: Acc:06-May-2008.         [ Links ]

8. LIU, D., ATKINSON, H.V., KAPRANOS, P., JIRATTITICHAROEN, W., and JONES, H. Microstrutural evolution and tensile mechanical properties of thixoformed high performance aluminium alloys, Materials Science and Engineering A, 2003, vol. 361, p. 213.         [ Links ]

9. MASUKU, E.P., GOVENDER, G., IVANCHEV, L., and MÖLLER, H. Rheocasting of Al-Cu alloy A201 with different silver contents, Solid State Phenomena, 2008, vol. 141-143, p. 151.         [ Links ]

10. ASTM E 8M - 04: Standard test methods for tension testing of metallic materials [metric].         [ Links ]

11. GABLE, B.M., SHIFLET, G.J., and STARKE, E.A. The Effect of Si Addition on the Precipitation of Ù in Al-Cu-Mg-(Ag) Alloys, Scripta Materialia, 2004, vol. 50, p. 149.         [ Links ]

12. BEFFORT, O., SOLENTHALEER, C., UGGOWITZER, P.J., and SPEIDEL, M.O. Improvement of strength and fracture toughness of a spray-deposited Al-Cu-Mg-Ag-Mn-Ti-Zr alloy by optimized heat treatments and thermomechanical treatments, Materials Science and Engineering A, 1995, vol. A191, p. 121.         [ Links ]

13. MÖLLER, H., STUMPF, W.E., and PISTORIUS, P.C. The influence of elevated Fe, Ni and Cr levels on the tensile properties of SSM-HPDC Al-7Si-0.6Mg alloy F357, Transactions of Nonferrous Metals Society of China, 2010, vol. 20, p. s842.         [ Links ]

14. TSENG, C.-J., LEE, S-L., TSAI, S.-C., and CHENG, C.-J. Effects of manganese on microstructure and mechanical properties of A206 alloys containing iron, Journal of Materials Research, 2002, vol. 17, p. 2243.         [ Links ]

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License