SciELO - Scientific Electronic Library Online

 
vol.111 número1Fatigue knowledge - a new lever in safety managementMine safety net development and applications índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Em processo de indexaçãoSimilares em Google

Compartilhar


Journal of the Southern African Institute of Mining and Metallurgy

versão On-line ISSN 2411-9717
versão impressa ISSN 0038-223X

J. S. Afr. Inst. Min. Metall. vol.111 no.1 Johannesburg Jan. 2011

 

JOURNAL PAPER

 

Controlled blasting for enhanced safety in the underground environment

 

 

E.J. Sellers

AEL Mining Services

 

 


SYNOPSIS

Good blasting practices based on the careful application of explosive energy lead to significantly safer mining operations. Case studies demonstrate how the selection of the correct charge mass, explosive type and round design are vital for extracting the exact amount of rock required and preventing spurious damage to the remaining rock mass. In other cases the explosives are applied to precondition the rock mass, design rockburst resistant support, prevent damage to important excavations and reduce the exposure of miners to unsafe conditions. The Hybrid Stress Blasting Model is used to understand the explosive rock interaction and to illustrate and contrast good and bad blasting practices. In all cases, good supervision is required to continue safe mining according to the design.

Keywords: Blasting, safety, production, preconditioning, explosives, numerical modelling, drop raising, vibrations, and presplitting


 

 

“Full text available only in PDF format”

 

 

References

1. FURTNEY, J., CUNDALL, P., and CHITOMBO, G. Developments in numerical modelling of blast induced rock fragmentation: Updates from the HSBM project. Proceedings of the 9th International symposium on rock fragmentation by blasting (Fragblast 9), Granada, Spain, 2009.         [ Links ]

2. SLABBERT, S. Powergel 813 Trial Project Section. AEL Internal Report. 2005.         [ Links ]

3. SELLERS, E.J. and NAPIER, J. Boundary element modelling of blast induced fracture growth. 5th Fifth South African Conference on Computational and Applied Mechanics SACAM06. SAAM, 2006.         [ Links ]

4. CUNNINGHAM, C., SELLERS, E.J., and SZENDREI, T. Cavity expansion energy applied to rock blasting. European Federation of Explosive Engineers Conference, EFEE, Vienna, 2006.         [ Links ]

5. PERSSON, P., HOLMBERG, R., and LEE, J. Rock Blasting and Explosives Engineering, CRC, Boca Raton, 1993.         [ Links ]

6. KILEBRANT, M. AND NORRGÅRD, T., and JERN, M. The size of the damage zone in relation to the linear charge concentration. Rock Fragmentation by Blasting. Sanchidrián (ed.) Taylor & Francis Group, London, 2010.         [ Links ]

7. RANGASAMY, T. Personal Communication, 2010.         [ Links ]

8. TOPER, A.Z., JANSE VAN RENSBURG, A.L., MILEV, A.M., GRODNER, M.W., and NOBLE, B.R. Criteria for preconditioning at varying stoping widths in different geotechnical areas, SIMRAC Project number: GAP 811, CSIR Division of Mining Technology, SIMRAC, 2003.         [ Links ]

9. TOPER, A.Z., STEWART, R.D., KULLMANN, D.H., GRODNER, M., LIGHTFOOT, N., JANSE VAN RENSBURG, A.L., and LONGMORE, P.J. Develop and implement preconditioning techniques to control face ejection rockbursts for safer mining in seismically hazardous areas, SIMRAC Final Report, Project GAP336. CSIR Division of Mining Technology, 1998.         [ Links ]

10. TOPER, A.Z. Numerical modelling to investigate the effects of blasting in confined rock. Simulation of a field study. Proc. 35th US Symposium on Rock Mechanics, 1995.         [ Links ]

11. ADAMS, D.J. and GEYSER, D. Preconditioning of 43 Hangingwall Haulage at Kloof No. 4 Shaft. SARES 99 conference, 1999.         [ Links ]

12. PALL, P. Personal communication. 2010.         [ Links ]

13. SELLERS, E.J. and HATTINGH, D. Preconditioning of a pillar on a platinum mine (AEL Internal note), 2007.         [ Links ]

14. FOURIE, J. Inverse box hole blasting at Elandsrand, International Mining, March, 2010. pp. 43-44.         [ Links ]

15. AEL Stope blasting handbook, AEL, 2007.         [ Links ]

16. AEL Explosive Engineers course notes, AEL. 2010.         [ Links ]

17. RUPPRECHT, S.M. Selecting an appropriate decline development advance rate. The Journal of The Southern African Institute of Mining and Metallurgy, vol. 106, 2006. pp. 845-848.         [ Links ]

18. CROSS, M. The Application Of Uni-delay Shock Tubes In Conventional Underground Development. Workshop for Explosive Engineers and Technical Representatives, AEL, 2008.         [ Links ]

19. FOURIE, F.J., ZANIEWSKI, T., and CROSS, M. Application of uni-delay shock tubes in underground mines, Narrow vein mining conference. SAIMM, 2008.         [ Links ]

20. HUSTRULID, W.A. and IVERSON, S.R. Evaluation of Kiruna mine drifting data using the NIOSH design approach. Rock Fragmentation by Blasting. Sanchidrián (ed.), Taylor & Francis Group, London, 2010. pp. 497-506.         [ Links ]

21. FOURIE, F.J., ZANIEWSKI, T., and CROSS, M. 2010, Optimization of blasting in narrow reef mines in South Africa, Rock Fragmentation by Blasting-Sanchidrián (ed), Taylor & Francis Group, London, ISBN 978-0-415-48296-7, 2010. pp. 695-705.         [ Links ]

22. JOUGHIN, W. Quantifying Rockfall and Rockburst Risk in Underground Mines. SANIRE symposium, 2010.         [ Links ]

23. HEAL, D., POTVIN, Y., and HUDYMA, M. Evaluating Rockburst damage potential in underground mining. ARMA/USRMS 06, 2006.         [ Links ]

24. HEAL, D. and POTVIN, Y. In situ Dynamic Testing of Ground Support Using Simulated Rockbursts. Deep Mining 07, Potvin, Y. (ed.) Australian Centre for Geomechanics, Perth, ISBN 978-0-9804185-2-1, 2007.         [ Links ]

25. HAGAN, T.O., MILEV, A.M., SPOTTISWOODE, S.M., HILDYARD, M.W., GRODNER, M., RORKE, A.J., FINNIE, G.J., REDDY, N., HAILE, A.T., LE BRON, K.B., and GRAVE, D.M. Simulated rockburst experiment-an overview. The Journal of The South African Institute of Mining and Metallurgy, August 2001, pp. 217-222.         [ Links ]

26. MKUMBO, J.C. Blast Vibrations Monitoring for Shaft Holing Project at Bulyanhulu Gold Mine, Barrick Tanzania, Workshop for Explosive Engineers and Technical Representatives, AEL, 2009.         [ Links ]

27. Grandin, T. and Johnson, C. Animals in Translation. Scribner, 2005.         [ Links ]

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons