SciELO - Scientific Electronic Library Online

 
vol.110 issue7Coal preparation research in South AfricaDual energy X-ray transmission sorting of coal author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Journal of the Southern African Institute of Mining and Metallurgy

On-line version ISSN 2411-9717
Print version ISSN 0038-223X

J. S. Afr. Inst. Min. Metall. vol.110 n.7 Johannesburg Jul. 2010

 

JOURNAL PAPER

 

Addressing the envelope

 

 

P. HandI; D. WisemanII

IIsandla Coal Consulting, Johannesburg, South Africa
IIDavid Wiseman Pty Ltd, Adelaide, Australia

 

 


SYNOPSIS

Most coal plants must run under conditions of varying feed conditions or are asked to produce qualities different from that used in the design. This can cause overloaded conditions as the 'bottlenecks' within the plant, depending on plant operation or as the feed changes.
During plant design, geological information can be used to determine washability envelopes and blends that may be expected. Historical data can also be used to develop a size distribution envelope as well as to assign reasonable models for each of the unit processes. In operation, a plant can be sampled to determine changes and to refine process models. The information obtained can then be used in an accurate simulation to define how the plant can deal with the changing environment.
This paper uses Limn:The Flowsheet Processor to simulate the coal plant in detail and will produce an accurate model, in terms of equipment sizing as well as water, medium, and solids balance, for each change in feed condition. It will show examples of running the simulation through complete density and size ranges and will determine the equipment required to address each part of the performance envelope.


 

 

“Full text available only in PDF format”

 

 

References

CLARKSON, C.J., EDWARD, D.J., and LAHEY, A.E. Use of Simulations in Coal Preparation Plant Practice. XIII International Coal Processing Congress, ACPS, Brisbane Australia. 1998.         [ Links ]

HAND, P.E. and WISEMAN D.M. Combined Coal And Medium Circuit Simulation For Design And Optimisation 12th ACPC (Australian Coal Preparation Society Conference). Sydney 2008.         [ Links ]

LEROUX, D. and HARDIE, C. Simulation of Closed Circuit Mineral Processing Operations using Limn® Flowsheet Processing Software. CMP 2003 Canadian Mineral Processor's 35th Annual Operator's Conference, Quebec, Canada. 2003.         [ Links ]

OSBORNE, D.G. Coal Preparation Technology, Graham & Trotman Limited, London, UK. 1988.         [ Links ]

WILLS, B.A. and NAPIER-MUNN, T.J. Will's Mineral Processing Technology, Butterworth-Heinemann, London, 2006.         [ Links ]

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License