SciELO - Scientific Electronic Library Online

vol.109 número8A critical evaluation of processes to produce primary titanium índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados



Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Em processo de indexaçãoSimilares em Google


Journal of the Southern African Institute of Mining and Metallurgy

versão On-line ISSN 2411-9717
versão impressa ISSN 0038-223X

J. S. Afr. Inst. Min. Metall. vol.109 no.8 Johannesburg Ago. 2009




Activated alumina-based adsorption and recovery of excess fluoride ions subsequent to calcium and magnesium removal in base metal leach circuits



L. LorenzenI, II; J.J. EksteenI, III; M. PelserI, IV; C. AldrichI; G. GeorgalliI

IDepartment of Process Engineering, University of Stellenbosch, Matieland, South Africa
IIBHP Billiton, Perth, Australia
IIILonmin Platinum, Sandton, South Africa
IVAnglo Research, Johannesburg, South Africa




An effective electrowinning process in hydrometallurgical industry requires fluoride levels in the base metal solution to be less than 10 mg/ℓ. Selective removal of the fluoride ions from base solution is thus desired, if fluoride was added to control calcium and magnesium in the circuit. Consequently, adsorption of fluoride onto activated alumina was studied in a batch and a column set-up. The effects of base metal solution pH, temperature, initial concentration and flow rate on activated alumina performance were investigated in either a batch or column configuration. A two-level factorial experimental design was implemented in studying column dynamics. Results demonstrate that activated alumina is an effective adsorbent for selective removal of fluoride from base solution. In the batch operation, fluoride was removed to values below the maximum allowable concentration (10 mg/) when pH was 8. In the column adsorption step at 55°C and 600mg/initial concentration, up to 16 bed volumes were processed before breakthrough level was reached. Desorption step using 1% sodium hydroxide solution achieved an elution of 8 bed volumes. The activated alumina (AA) had a capacity of 8.65 gF/AA at the 10 mgF/fluoride breakthrough level during the column adsorption test.

Keywords: Fluoride; activated alumina; adsorption; recovery; regeneration



“Full text available only in PDF format”




ABE, I., IWASAKI, S., TOKIMOTO, T., KAWASAKI, N., NAKAMURA, T., and TANADA, S. 2004. Adsorption of fluoride ions onto carbonaceous materials. J. Colloid Interface Sci., vol. 275, pp. 35-39.         [ Links ]

ANONYMOUS, 2005. Fluoride removal by activated alumina, Available at (Accessed October 2005).         [ Links ]

BOOSTER, J.L., VAN SANDWIJK, A., and M. A. REUTER, M.A. Thermodynamic modelling of magnesium fluoride precipitation in concentrated zinc sulphate environment. Min. Eng., vol. 14, no. 4, pp. 411-422.         [ Links ]

BREITBACH, M. BATHEN, D, and SCHMIDT-TRAUB, H. Desorption of a fixed-bed adsorber by ultrasound, Ultrasonics, vol. 40, no. 1-8, 2002. pp.679-682.         [ Links ]

DAS, D.P., DAS, J., and PARIDA, K. Physicochemical characterization and adsorption behavior of calcined Zn/Al hydrotalcite-like compound (HTlc) towards removal of fluoride from aqueous solution. J. Colloid Interface Sci., vol. 261, 2003. pp. 213-220.         [ Links ]

GHORAI, S. and PANT, K.K. Investigations on the column performance of fluoride adsorption by activated alumina in a fixed-bed. Chem. Eng. J., vol. 98, 2004. pp. 165-173.         [ Links ]

LI, Y.-H., WANG, S., ZHANG, X., WEI, J., XU, C., LUAN, Z., and WU, D. Adsorption of fluoride from water by aligned carbon nanotubes. Mater. Res. Bull., vol. 38, 2003. pp. 469-476.         [ Links ]

LI, Y.-H., WANG, S., CAO, A., ZHAO, D., ZHANG, X., XU, C., LUAN, Z., RUAN, D., LIANG, J., WU, D., and WEI, B. Adsorption of fluoride from water by amorphous alumina supported on carbon nanotubes. Chem. Phys. Lett., vol. 350, 2001. pp. 412-416.         [ Links ]

LOUNICI, H., BELHOCINE, D., GRIB, H., DROUICHE, M., PAUSS, A., and MAMERI, N. Fluoride removal with electro-activated alumina. Desalination, vol. 161, 2004. pp. 287-293.         [ Links ]

LOUNICI, H., ADOUR, L., BELHOCINE, D., ELMIDAOUI, A., BARIOU, B., and MAMERI, N. Novel technique to regenerate activated alumina bed saturated by fluoride ions. Chem. Eng. J., vol. 81, 2001. pp. 153-160.         [ Links ]

LUO, L., RAMIREZ, D., ROOD, M.J., GREVILLOT, G., K. HAY, K.J., and THURSTON, D.L. Adsorption and electrothermal desorption of organic vapors using activated carbon adsorbents with novel morphologies. Carbon, vol. 44, no. 13, 2006. pp. 2715-2723.         [ Links ]

MJENGERA, H. and MKONGO, G. Appropriate deflouridation technology for use in flourotic areas in Tanzania. Phys. Chem. Earth, vol. 26, 2003. pp. 1097-1104.         [ Links ]

MOGES, G., ZEWGE, F., and SOCHER, M. Preliminary investigations on the defluoridation of water using fired clay chips. J. Afr. Earth Sci., vol. 22, 1996 pp. 479-482.         [ Links ]

ONYANGO, M. S. and MATSUDA, H. Fluoride removal by adsorption technique. Tressaud, A., (ed.). Fluoride and Environment, vol. 2, Elsevier B.V., The Netherlands, 2006. pp. 1-51        [ Links ]

ONYANGO, M.S., KOJIMA,Y., KUCHAR, D., OSEMBO, S.O., and MATSUDA, H. Diffusion kinetic modeling of fluoride removal from aqueous solution by chargereversed zeolite particles. J. Chem. Eng. Jpn., vol. 38, 2005. pp. 701-710.         [ Links ]

ONYANGO, M.S., KOJIMA, Y., KUCHAR, D., KUBOTA, M., and MATSUDA, H. Uptake of fluoride by Al3+-pretreated low-silica synthetic zeolites: Adsorption equilibria and rate studies. Sep. Sci. Technol. vol. 41, 2006. pp. 1-22.         [ Links ]

ONYANGO, M.S., KOJIMA, Y., AOYI, O., BERNARDO, E.C., and MATSUDA, H. Adsorption equilibrium modeling and solution chemistry dependence of fluoride removal from water by trivalent-cation-exchanged zeolite. J. Colloid Interface Sci., vol. 279, 2004. pp. 341-350.         [ Links ]

REARDON, E.J. and Y. WANG,Y. A limestone reactor for fluoride removal from wastewaters. Environ. Sci. Technol., vol. 24, 2000. pp. 3247-3253.         [ Links ]

RODRIGO S. VIEIRA, R.S., MARISA M., and BEPPU, M.M. Dynamic and static adsorption and desorption of Hg(II) ions on chitosan membranes and spheres. Water Res., vol. 40, no. 8, 2006. pp. 1726-1734.         [ Links ]

RUBEL JR., F. The removal of excess fluoride from drinking water by the activated alumina method, Shupe, J.L., Peterson, H.B., N.C. Leone, N.C. (eds.), Fluoride Effects on Vegetation, Animals and Humans, Paragon Press, Salt Lake city, 1983. pp. 345-349.         [ Links ]

RUBEL JR., F. and WOOSLEY, R.D. The removal of excess fluoride from drinking water by activated alumina. J. AWWA. vol. 71, no. 1, 1979. pp. 45-49.         [ Links ]

RUIXIA, L., G. JINLONG, G., and HONGXIAO, T. Adsorption of fluoride, phosphate, and arsenate ions on a new type of ion exchange fiber. J. Colloid Interface Sci., vol. 248, 2002. pp. 268-274 .         [ Links ]

SÖHNEL, O. and GARSIDE, J. Precipitation: Basic Principles and Industrial Applications. Oxford: Butterworth-Heinemann. 1992.         [ Links ]

SUJANA, M.G., THAKUR, R.S., and RAO, S.B. Removal of fluoride from aqueous solution by using alum sludge. J. Colloid Interface Sci., vol. 206, 1998. pp. 94-101.         [ Links ]

WANG, S.L., HSEU, R.J., CHANG, R.R., CHIANG, P.N., CHEN, J.H., and TZOU, Y.M. Adsorption and thermal desorption of Cr(VI) on Li/Al layered double hydroxide. Coll. Surf., A 207 (1-3), 2006. pp. 8-14.         [ Links ]

WANG, Y. and REARDON, E.J. Activation and regeneration of a soil sorbent for defluoridation of drinking water. Appl. Geochem., vol. 16, no. 5, 2001. pp. 531-539.         [ Links ]

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons