SciELO - Scientific Electronic Library Online

vol.109 número6Mixing system design for the Tati Activox® autoclaveOxidative precipitation of Mn(II) from cobalt leach solutions using dilute SO2/air gas mixture índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados



Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Em processo de indexaçãoSimilares em Google


Journal of the Southern African Institute of Mining and Metallurgy

versão On-line ISSN 2411-9717
versão impressa ISSN 0038-223X

J. S. Afr. Inst. Min. Metall. vol.109 no.6 Johannesburg Jun. 2009




pH advanced process control solution for Impala BMR first stage high pressure acid-oxygen leach



A.F. KhanI; T. SpandielI; T. van SchalkwykII; J.A.M. RademanIII

IImpala Platinum Ltd
IIBlue Nickel Solutions CC
IIICSence Systems (Pty) Ltd




The CSense advanced process control (APC) solution's main objective was to improve the stability of the pH in the first stage leach process thereby improving nickel and iron extraction efficiencies and reducing the base metal (BM) content in the platinum group metals (PGM) concentrate. By improving the stability of the control of the pH on the first stage leach it had the corresponding effect of improving the Ni extraction efficiency by 0.5% and the Fe extraction efficiency by 3.3%. The system relieved the operators of many decisions that were virtually impossible to make given the complex, variable and real-time nature of the processes in their charge. On the operational side, the operators understand the APC system and they trust it. Another benefit is the reduction in pH peaks in the autoclave, which can oxidize certain elements whereby they become difficult, if not impossible, to leach. These elements go right through the process and end up contaminating the PGM solids, with the result that the entire batch has to be recycled through a lengthy and costly processing pipeline.



“Full text available only in PDF format”




JUUSO, E.K. Modelling and Simulation in Advanced Process Control, Control Engineering Laboratory, Department of Environmental and Process Engineering, University of Oulu, Finland. 2007.         [ Links ]

KHAN, A.F., SPANDIEL, T., VOSLOO, A., and SEMOSA, S. Advanced pH controller helps Impala BMR. MMS Mag, June 2008, pp. 20-22.         [ Links ]

OGUNNAIKE, B.A. and RAY, W.H. Process Dynamics, Modeling and Control. Oxford University Press, New York and Oxford. 1994.         [ Links ]

RADEMAN, J.A.M. The simulation of a transient leaching circuit. PhD thesis, University of Stellenbosch, South Africa. 1995. 261 pp.         [ Links ]

RADEMAN, J.A.M. Impala BMR First Stage Leach pH control, Scoping Study CSKM0510-0263-1.1, 15 December 2005 (Internal document), 2005. 49 pp.         [ Links ]

RADEMAN, J.A.M. Impala BMR First Stage Leach pH control, Performance Evaluation. 2007.         [ Links ]

CSKM0510-0263-3.3, 12 March 2007 (Internal document), 10 pp.         [ Links ]

RADEMAN, J.A.M., LORENZEN, L., and VAN DEVENTER, J.S.J. The leaching characteristics of Ni-Cu matte in the acid-oxygen pressure leach process at Impala Platinum. Hydrometallurgy, vol. 52, 1999. pp. 231-252.         [ Links ]

REZNIK, L., GHANAYEM, O., and BOURMISTROV, A. PID plus fuzzy controller structures as a design base for industrial applications. Engineering Applications of Artificial Intelligence, vol. 13, 2000. pp. 419-430.         [ Links ]

SEBORG, D.E., EDGAR, T.F., and MELLICHAMP, D.A. Process Dynamics and Control. Johnson Wiley & Sons, New York. 1989.         [ Links ]

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons