Resumo

LE ROUX, Rikus; VAN SCHOOR, George  e  VAN VUUREN, Pieter. Parsing and analysis of a Xilinx FPGA bitstream for generating new hardware by direct bit manipulation in real-time. SACJ [online]. 2019, vol.31, n.1, pp.80-102. ISSN 2313-7835.  http://dx.doi.org/10.18489/sacj.v31i1.620.

Despite the many advantages run-time reconfiguration of FPGAs brings to the table, its usage is mostly limited to quasi-static applications. This is either due to the throughput of the reconfiguration process, or the time required to create new hardware. In order to optimise the former, the literature proposes a block RAM (BRAM)-based architecture in which a new configuration is stored in localised memory and reconfiguration is facilitated by a controller implemented in the FPGA fabric. The limitation of this architecture is that only a subset of configurations can be stored. When new hardware is required, the slow synthesis process (or a part thereof) has to be repeated for each new configuration. Various third-party tools aim to mitigate this overhead, but since the bitstream is shrouded in obscurity, all rely on a layer of abstraction that make them unusable in real-time. To address this issue, this paper presents a novel method to parse and analyse a Xilinx^® FPGA bitstream to extract certain characteristics. It is shown how these characteristics could be used to design and implement a bitstream specialiser, capable of taking a bitstream and modifying the configuration bits of lookup tables in real-time. CATEGORIES: · Hardware ~ Reconfigurable logic and FPGAs · Computer systems organization ~ Other architectures

Palavras-chave : Bitstream analysis; reconfiguration; parsing; direct bitstream manipulation.

        · texto em Inglês     · Inglês ( pdf )