Resumen

UYSAL, T.. Optimization of shape factor by the response surface method, and the effect on sphalerite flotation recovery. J. S. Afr. Inst. Min. Metall. [online]. 2023, vol.123, n.9, pp.445-450. ISSN 2411-9717.  http://dx.doi.org/10.17159/2411-9717/2645/2023.

Various morphological parameters that affect the flotation recovery of sphalerite were modelled and optimized using the response surface method (RSM). The effects of roughness value, shape factor, and collector concentration were investigated using the central composite full design method. The results were evaluated by analysis of variance. The optimum roughening time was found to be 25 minutes, the optimum roughness value was 2.9071 um, and the optimum collector concentration was 0.001 M. Using these values, a flotation recovery of 98.01% was obtained. Similarly, in shape factor studies, the optimum grinding time was 15 seconds, the optimum roundness value 0.7421, and the optimum collector concentration 0.0009 M, which resulted in a flotation recovery of 94.30%. The average error between the optimization results and the experimental results was estimated to be less than 6%, and the R² values were greater than 90%. The study shows that RSM can be effectively applied in finding the economic optimum condition for obtaining maximum flotation recovery with minimum reagent consumption.

Palabras clave : sphalerite flotation; roughness; roundness; optimization.

        · texto en Inglés     · Inglés ( pdf )