Resumo

MATJIE, R. et al. Effect of chemical, mineralogical, and petrographic properties on the grindability of a South African Highveld coal. J. S. Afr. Inst. Min. Metall. [online]. 2023, vol.123, n.7, pp.381-390. ISSN 2411-9717.  http://dx.doi.org/10.17159/2411-9717/2423/2023.

Coal properties that are associated with wear and damage of grinding equipment during pulverization prior to combustion were investigated. A South African Highveld feed coal and its beneficiated fractions were crushed to <1 >0.25 mm particles for the grindability tests. These particles were milled and screened into <75 µm and >75 um fractions, which were analysed by different techniques to establish a correlation with the conventional Hardgrove Grindability Index (HGI). The <1.5 g.cm^-3 float fraction, which contained 93 vol.% (mineral matter free) total -macerals, 9% kaolinite, and had the lowest HGI (57) (hardest to grind) was pulverized for 15, 30, 60, and 120 minutes for particle size distribution analysis. This analysis indicated that the content of <75 um particles increases with increased grinding time. The >1.9 g.cm^-3 sink fraction, with the highest HGI (76), 44% kaolinite, and 20 vol.% total macerals, was ground easily to generate the highest proportion of <75 um particles. Based on higher correlation coefficients (R² = 0.77-0.91), the ash yield, mineral matter, petrographic composition, and fixed-carbon have significant effects on the HGI. Conversely, the inherent moisture and total sulphur (R² = 0.48-0.62) have only minor effects on the HGI. Results from this investigation could be implemented in the preparation of a suitable pulverized fuel with little equipment wear, as well as utilizing mineralogical and petrographic compositions. Finally, the effect of microlithotypes and maceral types in South African feed coals on the HGI should be investigated in further pulverization and grindability studies.

Palavras-chave : coal; mineralogy; petrography; grindability; Hardgrove Index.

        · texto em Inglês     · Inglês ( pdf )