Abstract

MABENTSELA, A.  and  MAINZA, A.. Numerical investigation into slag solidification inside an ilmenite DC arc furnace using a finite element method approach. J. S. Afr. Inst. Min. Metall. [online]. 2023, vol.123, n.3, pp.113-122. ISSN 2411-9717.  http://dx.doi.org/10.17159/2411-9717/1247/2023.

A finite element model of a 5 m radius DC arc ilmenite furnace in idling mode was used to test the notion that the slag solidifies when it comes in to contact with colder pig iron, thus constituting the initial step in the formation of solid slag at the slag-pig iron interface. It was found that a slag that is 150°C hotter than the pig iron does not solidify at the interface. The 150°C temperature difference between the slag and pig iron is a result of solid slag at the slag-pig iron interface, not the other way around as suggested in the literature. Calculations show that the thickness of the frozen slag at the slag-pig iron interface is 1.7 cm for the furnace used. It is proposed that slag solidification begins with the slow co-current flow of molten slag and pig iron in the outer parts of the furnace. This provides enough time for molten slag to interact with molten pig iron without solidifying. As the reduction products form due to reduction of the slag by carbon in the pig iron, the slag solidifies. This approach negates the need for the slag to solidify by merely coming into contact with an inherently colder pig iron. Making use of a low thermal contact conductance between the slag and pig iron was found to be sufficient to numerically capture the presence of solid slag at the slag-pig iron interface and to preserve the 150°C difference between the slag and pig iron phase.

Keywords : ilmenite smelting; slag-pig iron interface; effective thermal conductivity.

        · text in English     · English ( pdf )