Resumen

MUTIMUTEMA, P.; AKDOGAN, G.  y  TADIE, M.. Evaluation of pre-treatment methods for gold recovery from refractory calcine tailings. J. S. Afr. Inst. Min. Metall. [online]. 2022, vol.122, n.10, pp.561-570. ISSN 2411-9717.  http://dx.doi.org/10.17159/2411-9717/2070/2022.

The South African gold mining industry has a legacy of abundant tailings dams, which have attracted the attention of investors because of their potential as a cheaper secondary gold resource. In this we investigate study gold recovery from a refractory calcine tailings dam. Bulk mineralogy of the tailings indicated silicates and iron oxides to be the most abundant phases. Scanning Electron Microscopy (SEM) showed gold to exist in submicrometre and micrometre sizes, as free gold, and associated with arsenic, sulphur, and silicates e.g. quartz and talc. Gold recovery by direct cyanidation was low at 17.3%. Mechanical (ultra fine grinding P₈₀ -16µm) and chemical (alkaline, NaOH) pre-treatment and microwave roasting and microwave-assisted cyanide leaching were investigated to increase gold recoveries. Ultrafine grinding was the most effective, producing recoveries of 66.5%. NaOH pre-leaching of ultrafine milled material increased recovery to 71.5%. Alkaline pre-leaching overall increased recoveries for non-pre-treated material, making this process the most preferred because it is less costly than ultrafine grinding. Microwave roasting and microwave-assisted leaching did not achieve higher recoveries than alkaline pre-treatment or fine grinding. The investigation highlights and confirms that chemical treatment with NaOH is a powerful tool for gold extraction from refractory tailings.

Palabras clave : gold recovery; refractory calcine tailings; ultrafine grinding; alkaline pre-treatment; microwave.

        · texto en Inglés     · Inglés ( pdf )