Resumen

KERSTEN, R.W.O.. An alternative pillar design methodology. J. S. Afr. Inst. Min. Metall. [online]. 2019, vol.119, n.5, pp.471-478. ISSN 2411-9717.  http://dx.doi.org/10.17159/2411-9717/16/388/2019.

The aim was to investigate stable pillar design procedures currently in use on chrome and platinum mines, subject them to a critical appraisal, and review some of the alternatives proposed in the literature. It is concluded that these pillar design methodologies suffer from drawbacks that can be detrimental to the mining industry and that an improvement is essential. It was decided that the increased availability of analytical models and failure criteria could be exploited to update the empirical to an analytical/empirical method. The proposed methodology adopted FLAC2D simulations using the Hoek-Brown failure criterion to calculate full stress-deformation curves for typical pillars. The mine stiffness concept was introduced to determine the pillar load, integrating the influence of the pillar and strata stiffness and mining geometry. The proposed methodology was calibrated by comparing experimental and predicted deformations and failure depth of pillars in one hard-rock mine. The conclusion was that the methodology is an improvement over the one currently in use. An improved factor of safety is given by the intersection point of curves for the stiffness of the system and the pillar strength.

Palabras clave : stable pillar design; failure criteria; analytical model; stress deformation curve; strata stiffness.

        · texto en Inglés     · Inglés ( pdf )