Resumo

LIU, X.; LIU, C.; WANG, B.  e  YE, F.. Optimization of iron ore blending in the COREX shaft furnace. J. S. Afr. Inst. Min. Metall. [online]. 2019, vol.119, n.5, pp.445-452. ISSN 2411-9717.  http://dx.doi.org/10.17159/2411-9717/18/018/2019.

To extend the variety of lump ores that are used in the COREX shaft furnace and to optimize iron ore blending, the original evaluation method for iron ores that was proposed by Voestalpine AG has been improved. Physicochemical and metallurgical properties of iron ores, including Sishen lump ore and CVRD pellets, which are currently used in the COREX process, and three other lump ores, were assessed and compared. Ore matching principles were proposed and five optimized iron ore blending schemes designed and verified by laboratory experiments to prove the effectiveness of the improved evaluation method. The replacement of Sishen lump ore by the alternative L2 and L3 lump ores without varying the proportion of CVRD pellets could improve the degree of reduction and rate of metallization, and decrease the bonding index. Based on the results of laboratory test work and industrial- trials, an ore blending scheme of 60% CVRD, 20% L2, and 20% L3 is recommended for use in the COREX process.

Palavras-chave : COREX; iron ores; metallurgical properties; blending optimization.

        · texto em Inglês     · Inglês ( pdf )