Abstract

SNYMAN, M.E.C.  and  NAUDE, N.. Improved ultrafine coal dewatering using different layering configurations and particle size combinations. J. S. Afr. Inst. Min. Metall. [online]. 2019, vol.119, n.3, pp.307-312. ISSN 2411-9717.  http://dx.doi.org/10.17159/2411-9717/2019/v119n3a10.

Coal fines produced during processing are difficult to dewater and result in a lower quality product and consequent lower value. A South African coal mine experiences severe difficulties with belt filter dewatering operations due to the presence of fines reporting from the thickener underflows. Plant 2 currently handles super-fine particles of size -34 μm and has low belt filter efficiency: excessive moisture retention lowers the product quality and strains downstream processing. It was necessary to determine an alternative method for dewatering these fines. Blending of fine material with coarser material was proposed as a solution. The effect of coal particle size and layering during ultrafines belt filter dewatering was evaluated using various blends of the fine Plant 2 material with coarser Plant 1 material. The best layering arrangement of the two materials and its optimum blend required to achieve reduced filter cake moisture content was determined in practise using a vacuum filter to simulate belt filtration. A blend of the two materials gave improved dewatering efficiency for the belt filters compared with that of the Plant 2 material alone. The best layering configuration was with Plant 2 material at the bottom and Plant 1 material on top. The optimum blend for industrial applications comprised 48% fines from Plant 2.

Keywords : ultrafine coal; dewatering; belt filter; vacuum filter; moisture content.

        · text in English     · English ( pdf )