Resumen

KARAMPINOS, E.; HADJIGEORGIOU, J.  y  PIERCE, M.. Explicit representation of rock reinforcement in 3D DEM models for foliated ground. J. S. Afr. Inst. Min. Metall. [online]. 2018, vol.118, n.12, pp.1243-1250. ISSN 2411-9717.  http://dx.doi.org/10.17159/2411-9717/2018/v118n12a2.

One of the main challenges in the numerical modelling of ground support in underground excavations is to reproduce the performance of the sequential installation of the reinforcement while capturing the rock mass behaviour of an advancing face in 3D. The 3D modelling approaches used to simulate the progressive advance of excavations are mostly continuum and often cannot reproduce the rock mass failure mechanisms. The 3D discrete element method (DEM) can better reproduce structurally controlled rock mass failure mechanisms and can explicitly represent the reinforcement elements. This paper builds on previous work that reproduced the structurally controlled squeezing conditions in an underground hard-rock mine using 3D DEM and the in situ behaviour of reinforcement under pull conditions. It addresses important issues on the way reinforcement is explicitly introduced in discrete element models. A pseudo-3D model is employed to overcome the computational restrictions and time limitations of a 3D modelling approach. The work focuses on the scaling of the material properties of the ground support elements when the thickness of the model is not equal to the out-of-plane spacing of reinforcement. It demonstrates the scaling methodology based on the type of the modelled reinforcement elements used and investigates the significance of this approach. The advantages and disadvantages of this approach with respect to 2D and 3D methods are discussed. The results are compared with field data and previous modelling work done at the mine.

Palabras clave : rock reinforcement; discrete element method; squeezing ground.

        · texto en Inglés     · Inglés ( pdf )