Resumo

JESSU, K.V.  e  SPEARING, A.J.S.. Effect of dip on pillar strength. J. S. Afr. Inst. Min. Metall. [online]. 2018, vol.118, n.7, pp.765-776. ISSN 2411-9717.  http://dx.doi.org/10.17159/2411-9717/2018/v118n7a10.

Pillars are commonly left in underground mining, either for secondary extraction after the primary stopes have been filled or to maintain the overall macro-stability of the mine during its useful life by supporting the overburden. The dip, dimensions, and geological features of an orebody determine the mining method used. If pillars are used, the orientation of pillars can vary from horizontal to vertical and anything in-between. The pillars left in underground mines can be loaded axially or obliquely (axial and shear components) depending on their orientation and that of the field stresses. Empirically established methods or numerical modelling are used to design mine pillars. We conducted studies on square and rectangular pillars under normal and oblique loading. The strengths of the horizontal pillars were calibrated to the Lunder and Pakalnis pillar strength, while the strength of the inclined pillars was obtained in reference to the horizontal pillar performance. The failure modes are described for inclined pillars at different width to height ratios. Brittle failure was determined to be the dominant failure mode in the inclined pillars. Rectangular pillars are beneficial only when the length is increased along the dip at higher inclinations and with W/H ratios greater than 1.5.

Palavras-chave : pillar orientation; pillar strength; normal loading; oblique loading.

        · texto em Inglês     · Inglês ( pdf )