Resumen

MAHLALELA, S.S.  y  PISTORIUS, P.G.H.. Microstructural characterization of laser beam and gas tungsten arc welded zirconium-2.5Nb. J. S. Afr. Inst. Min. Metall. [online]. 2017, vol.117, n.10, pp.947-953. ISSN 2411-9717.  http://dx.doi.org/10.17159/2411-9717/2017/v117n10a4.

The current study is intended to characterise the complex microstructure that results from autogenous welding of Zr-2.5Nb and its influence on mechanical properties. Laser beam welding (LBW) and gas tungsten arc welding (GTAW) were performed on a 1.5 mm thick samples by applying different combinations of speed and power to vary the heat input. The effect of cooling rate on ß-a phase transformation temperature and the resulting microstructure was investigated using a Bahr dilatometer. In addition, mechanical properties were determined by tensile and hardness testing. The base metal microstructure consisted of a fine structure of Zr-alpha with a small fraction of Nb-beta phase. Both LBW- and GTAW-welded joints displayed similar martensitic microstructures, with the main difference being the weld geometry and strength.

Palabras clave : Zr-2.5Nb; autogenous welding; microstructure; ß-a transformation.

        · texto en Inglés     · Inglés ( pdf )