Resumen

VAN DER MERWE, J.  y  THARANDT, D.. Corrosion resistance of laser-cladded 304L stainless steel enriched with ruthenium additions exposed to sulphuric acid and sodium chloride media. J. S. Afr. Inst. Min. Metall. [online]. 2015, vol.115, n.6, pp.499-505. ISSN 2411-9717.

The corrosion behaviour of 304L stainless steel laser-cladded with various amounts of ruthenium (Ru) was evaluated in solutions of sulphuric acid and sulphuric acid plus sodium chloride at 25°C and 45°C by open-circuit potential and cyclic potentiodynamic polarization tests. In general, the addition of Ru to the stainless steel increased its corrosion resistance in 1 M H₂SO₄, as well as in 1 M H₂SO₄ plus 1 wt% NaCl. This was observed for a number of parameters such as corrosion rate, corrosion potential, open-circuit potential, and current density. However, increasing the amount of Ru added beyond a certain level did not result in further improvement in corrosion protection. For each environment there is an optimal Ru concentration for the best corrosion protection. For example, in 1 M H₂SO₄ at 25°C, 2.44 wt% Ru shows the least active surface in terms of corrosion. Further research into ruthenium coatings on stainless steels is recommended.

Palabras clave : corrosion protection; ruthenium; laser cladding; 304 stainless steel.

        · texto en Inglés     · Inglés ( pdf )