Resumen

HUYSAMEN, H.W. et al. 3D printed laryngoscope for endotracheal intubation. S. Afr. J. Ind. Eng. [online]. 2020, vol.31, n.3, pp.209-217. ISSN 2224-7890.  http://dx.doi.org/10.7166/31-3-2446.

This study aims to determine whether additive manufacturing can be used to produce a safe and reliable video laryngoscope. Different designs were proposed and evaluated with a mannequin for usability. Finite element analysis (FEA) was done to estimate the stress distribution, maximum displacement at the tip, and factor of safety. A final 3D printed laryngoscope design was chosen on the basis of this evaluation. Future work on validation, whether it is safe to be used, and the limitations of the device are discussed. The device will be printed under predetermined settings and material to conform to the validation.

        · resumen en Africano     · texto en Inglés     · Inglés ( pdf )