SciELO - Scientific Electronic Library Online

 
vol.29 issue4Principles of social cost-benefit analysis of public road projects followed in South AfricaA guide for integrating total quality management and physical asset management in the food industry author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Article

Indicators

Related links

  • On index processCited by Google
  • On index processSimilars in Google

Share


South African Journal of Industrial Engineering

On-line version ISSN 2224-7890
Print version ISSN 1012-277X

Abstract

NAIDOO, T.; WALKER, A.; BRIGHT, G.  and  DAVRAJH, S.. Fuzzy logic control for varied inspection. S. Afr. J. Ind. Eng. [online]. 2018, vol.29, n.4, pp.141-154. ISSN 2224-7890.  http://dx.doi.org/10.7166/29-4-1868.

Varied inspection is an on-line dynamic inspection method in which the amount of inspection performed fluctuates, based on production needs. A two-level control architecture of fuzzy controllers was used to perform varied inspection. The research was the application of varied inspection into three manufacturing subsystems: transfer lines, assembly, and disassembly. The results from each simulation showed that varied inspection could be used to meet production cycle aims while reducing manufacturing lead time. Varied inspection was compared with 100 per cent inspection to determine the significance of varied inspection compared with traditional quality control methods.

        · abstract in Afrikaans     · text in English     · English ( pdf )

 

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License