SciELO - Scientific Electronic Library Online

 
vol.26 número2Heat treatment of Ti-6Al-4V produced by lasercusingApplication of a system dynamics model to improve the performance of make-to-order production índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • En proceso de indezaciónSimilares en Google

Compartir


South African Journal of Industrial Engineering

versión On-line ISSN 2224-7890
versión impresa ISSN 1012-277X

Resumen

BENSON, J.M.  y  SNYDERS, E.. The need for powder characterisation in the additive manufacturing industry and the establishment of a national facility. S. Afr. J. Ind. Eng. [online]. 2015, vol.26, n.2, pp.104-114. ISSN 2224-7890.

The characteristics of powders used in additive manufacturing can have significant effects on process efficiencies and the quality of the final products. Powder sizes and morphologies need to be optimised for a particular process, and this requires the facilities to perform these measurements as well as provide a quality check on powder batches that are purchased. The establishment of a national powder characterisation facility has been identified by the Titanium Centre of Competence (a DST-funded initiative) as a critical form of support for the development of a South African titanium metal industry. This paper discusses what effect the different powder characteristics can have on the selective laser sintering processes, as well as the state of development of this national facility.

        · resumen en Africano     · texto en Inglés     · Inglés ( pdf )

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons