SciELO - Scientific Electronic Library Online

vol.25 número1A simplified numerical decision-making methodology for physical asset management decisionsQuality and safety management systems: Joint action for certification of small firms in an industrial cluster in Brazil índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados



Links relacionados

  • En proceso de indezaciónCitado por Google
  • En proceso de indezaciónSimilares en Google


South African Journal of Industrial Engineering

versión On-line ISSN 2224-7890
versión impresa ISSN 1012-277X


MARSUDI, M.  y  SHAFEEK, H.. Cycle time analysis of tipping trailer frame: A case study in a heavy equipment industry. S. Afr. J. Ind. Eng. [online]. 2014, vol.25, n.1, pp.176-188. ISSN 2224-7890.

A key element with which manufacturing industries should concern themselves in respect of cost and efficiency of operation is the cycle time for preparing their products. A reduction in operational time can result in dramatic improvements in both cost and efficiency. Unfortunately, cycle time problems are sometimes difficult to analyse: there are many factors related to this parameter. This paper presents a cycle time analysis of a tipping trailer frame in a heavy equipment industry. The cycle time analysis, based on the cycle time data collected by a time study, together with the use of an Arena software simulation, is outlined. From the results of this study, it was found that the manufacturing cycle time was 56 hours, and that resources were under-utilised.

        · resumen en Africano     · texto en Inglés     · Inglés ( pdf )


Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons