SciELO - Scientific Electronic Library Online

 
vol.23 número2Overview of work piece temperature measurement techniques for machining of Ti6Al4VApplication of laser additive manufacturing to produce dies for aluminium high pressure die-casting índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Em processo de indexaçãoSimilares em Google

Compartilhar


South African Journal of Industrial Engineering

versão On-line ISSN 1012-277X

Resumo

COMBRINCK, J.; BOOYSEN, G.J.; VAN DER WALT, J.G.  e  DE BEER, D.J.. Limited run production using Alumide® tooling for the plastic injection moulding process. S. Afr. J. Ind. Eng. [online]. 2012, vol.23, n.2, pp. 131-146. ISSN 1012-277X.

Existing techniques for the production of conventional steel tooling for plastic injection moulding are expensive and time-consuming. As a result, many new products often do not advance beyond the prototype stage. This paper describes an investigation into the possibility of using laser sintered Alumide® (an aluminium-filled nylon material) in a novel alternative process for producing hybrid rapid tooling tools. Initial experiments performed by researchers at the Central University of Technology have shown excellent results. An Alumide® tool can be manufactured in a shorter time and at a significantly lower cost than the same size direct metal laser sintered tool.

        · resumo em Africaner     · texto em Inglês     · Inglês ( pdf )

 

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License