Resumen

ADETORO, Ezekiel A; OJOAWO, Samson O  y  SALMAN, AM. Adsorption and desorption studies of Caricapapaya stem activated with zinc chloride for mining wastewater treatment. Water SA [online]. 2022, vol.48, n.2, pp.187-198. ISSN 1816-7950.  http://dx.doi.org/10.17159/wsa/2022.v48.i2.3903.

The adsorption of eight selected potentially toxic metal ions from actual mining wastewater obtained from Igbeti, Nigeria, was established using activated carbon chemically prepared from Carica papaya stem with zinc chloride (CPSAC-ZnCl₂) as activating agent. Characterization of the prepared CPSAC-ZnCl₂ sample for surface morphology and functional groups was done by scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectroscopy, respectively. An atomic absorption spectrophotometer (AAS) was utilized for characterization of the selected metals in the mining wastewater. Batch adsorption and desorption studies were conducted on removal of the metals from the sample using CPSAC-ZnCl₂. The data obtained were fitted to isotherm (Freundlich and Langmuir); kinetic (pseudo-second-order and intra-particle diffusion) and thermodynamic (standard enthalpy change - ΔH°, entropy change - ΔS° and free energy change - ΔG°) models. These were considered under two error functions (sum of absolute errors - SAE, coefficient of determination - R²) of linear and non-linear regression analyses. The SEM micrograph revealed that the CPSAC-ZnCl₂ sample was 2.0-50.0 nm with FTIR spectra absorption peaks ranging from 746.2 to 3 987.0 cm^-1. The initial concentrations of selected metals in the wastewater varied from 5.7 to 756.5 mg/L. The adsorbent dosage, agitation rate, contact time, pH and temperature for optimum condition of CPSAC-ZnCl₂ were 0.6 g, 150.0 r/min, 60 min, pH of 7.0 and 30°C, respectively. The selected metals' adsorption onto CPSAC-ZnCl₂ followed Freundlich and Langmuir isotherm models pseudo-second-order kinetics with intra-particle diffusion mechanism. The ΔH°, ΔS° and ΔG° for the processes were '34.5, 64.5 and 22 012.0 kJ/mol, respectively. The adsorbent achieved an adsorption efficiency of above 95.0%, and is thus recommended for industrial application in remediating potentially toxic metals from wastewater.

Palabras clave : error function; isotherms; kinetic; thermodynamic; toxic metals.

        · texto en Inglés     · Inglés ( pdf )