Resumen

VICENTIN, Bruna Martins  y  DA ROCHA, Raquel Dalla Costa. Expanded perlite: potential for removing antibiotics from water. Water SA [online]. 2021, vol.47, n.4, pp.417-422. ISSN 1816-7950.  http://dx.doi.org/10.17159/wsa/2021.v47.i4.3817.

This work aims to study the potential of expanded perlite (EP) for amoxicillin (AMX) removal in aqueous solution. For this purpose, chemical, morphological, and textural characteristics of the EP were evaluated, in addition to AMX removal by the adsorption process. The kinetic, isothermal, and thermodynamic parameters were also assessed. The EP presented an isoelectric point of 6.5 and a surface with hydroxyl bands, which favour the adsorption process. Air bubbles were sealed and randomly connected with each other, increasing the surface area relative to the adsorption sites. These non-porous or macro-porous sites demonstrate efficiency in the mechanisms of mass transfer. AMX removal was determined to be a pseudo-second-order process since the adsorption velocity was proportional to the square of the available adsorption sites and indicates heterogeneity in the surface interactions between the adsorbed molecules. Also, the interactions were considered multilayer for low concentrations and monolayer for high concentrations (Sips isotherm). The adsorption process was endothermic and utilised a physical adsorption mechanism. Considering that no modification treatment was applied to the EP, and due to its neutral isoelectric point, macropores, amorphous and dipole induction force (physical adsorption) characteristics, favourable affinity between EP and AMX was observed.

Palabras clave : aluminosilicate; amoxicillin; adsorption; characteristics; mathematic modelling.

        · texto en Inglés     · Inglés ( pdf )