SciELO - Scientific Electronic Library Online

 
vol.47 issue1The potential use of plant species within a Renosterveld landscape for the phytoremediation of glyphosate and fertiliserSynthesis of PES and PES/chitosan membranes for synthetic acid mine drainage treatment author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Article

Indicators

Related links

  • On index processCited by Google
  • On index processSimilars in Google

Share


Water SA

On-line version ISSN 1816-7950
Print version ISSN 0378-4738

Abstract

NSENGIYUMVA, Olivier; COOTHEN, Yuva; IKUMI, David  and  NAIDOO, Kirshen. The impact of sludge return liquors on South African wastewater treatment plants. Water SA [online]. 2021, vol.47, n.1, pp.106-112. ISSN 1816-7950.  http://dx.doi.org/10.17159/wsa/2021.v47.i1.9450.

There have been three considerable shifts, in the past 20 years, in the conventional design and modelling of wastewater treatment plants (WWTPs): (i) single unit process to plant-wide modelling, (ii) consideration of WWTPs as water and resource recovery facilities (WRRFs), and (iii) the need to simplify WWTP models to allow their intake by new stakeholders (i.e. plant operators, designers and decision-makers) who use these models for evaluation of WWTP optimisation strategies. The latter shift has prompted the debate about model complexity versus the required modelling purpose among modellers. In addition to the aforementioned shifts, there has been limited research on the impact of sludge recycling dewatering liquor on the overall plant performance, especially in the context of South African WWTPs. A simplified full-scale steady-state WWTP simulation tool was developed, based on principles of sound mass-balance stoichiometry and rate-limiting kinetics. This tool enables the user to analyse the impact of recycling the DWL on the plant performance through different scenarios. The strategic scenarios evaluated included the implementation of two side-stream treatment processes (STPs), namely BABE and struvite precipitation. The evaluation of various strategies was done using the benchmark simulation model (BSM) task group plant performance indices (i.e. effluent quality and operational cost indices, EQI and OCI, respectively) incorporated into the simplified steady-state full-scale models. The integration of STP in the WWTP layout results in better EQI and OCI. The composition of the DWL affects the choice of the STP to be used, i.e., for DWL from an AD treating WAS that is not P-rich the recommended side-stream treatment operation would be the BABE process rather than struvite precipitation.

Keywords : WWTP full-scale modelling; model simplification; steady-state simulation; plant performance indices; BABE process; struvite precipitation; dewatering liquors.

        · text in English     · English ( pdf )

 

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License