SciELO - Scientific Electronic Library Online

 
vol.45 número3Optimisation of representative elementary area (REA) for the preparation of lineament density map of fractured rock aquiferFirst report on the colony-forming freshwater ciliate Ophrydium versatile in an African river índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • En proceso de indezaciónSimilares en Google

Compartir


Water SA

versión On-line ISSN 1816-7950
versión impresa ISSN 0378-4738

Resumen

DEWIDAR, Ahmed Z; AL-GHOBARI, Hussein  y  ALATAWAY, Abed. Developing a fuzzy logic model for predicting soil infiltration rate based on soil texture properties. Water SA [online]. 2019, vol.45, n.3, pp.400-410. ISSN 1816-7950.  http://dx.doi.org/10.17159/wsa/2019.v45.i3.6737.

The prediction of the soil infiltration rate is advantageous in hydrological design, watershed management, irrigation, and other agricultural studies. Various techniques have been widely used for this with the aim of developing more accurate models; however, the improvement of the prediction accuracy is still an acute problem faced by decision makers in many areas. In this paper, an intelligent model based on a fuzzy logic system (FLS) was developed to obtain a more accurate predictive model for the soil infiltration rate than that generated by conventional methods. The input variables that were considered in the fuzzy model included the silt and clay contents. The developed fuzzy model was tested against both the observed data and multiple linear regression (MLR). The comparison of the developed fuzzy model and MLR model indicated that the fuzzy model can simulate the infiltration process quite well. The coefficient of determination, root mean square error, mean absolute error, model efficiency, and overall index of the fuzzy model were 0.953, 1.53, 1.28, 0.953, and 0.954, respectively. The corresponding MLR model values were 0.913, 2.37, 1.92, 0.913, and 0.914, respectively. The sensitivity results indicated that the clay content is the most influential factor when the FLS-based modelling approach is used for predicting the soil infiltration rate.

Palabras clave : FLS; infiltration rate; MLR; modelling; sensitivity analysis.

        · texto en Inglés     · Inglés ( pdf )

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons