SciELO - Scientific Electronic Library Online

vol.45 issue3Biological sulphate reduction with primary sewage sludge in an upflow anaerobic sludge bed reactor - Part 6: Development of a kinetic model for BSRRemoval of copper(II) from aqueous solution using spent tea leaves (STL) as a potential sorbent author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand



Related links

  • On index processCited by Google
  • On index processSimilars in Google


Water SA

On-line version ISSN 1816-7950
Print version ISSN 0378-4738


BAKOS, V; DEAK, A  and  JOBBAGY, A. Reconsideration and upgrading of sampling and analysis methods for avoiding measurement-related design and operation failures in wastewater treatment. Water SA [online]. 2019, vol.45, n.3, pp.329-337. ISSN 1816-7950.

Success of design and high operational efficiency may basically stand or fall on the quality of measured (or estimated) input data. Even small mistakes committed in the initial steps of sampling and analysis may become large once scaled up in the design process or during full-scale operation. The paper provides several experiment-based practical recommendations and easily implemented, powerful methods for appropriate sampling and analysis practice in wastewater treatment. Representative wastewater characterization is crucial for satisfactory design and cost-effective operation. The paper highlights hidden problems and challenges of sampling and analysis in activated sludge wastewater treatment which may strongly affect the quality of input data, and thus basically determine the modelling outputs. Full-scale results proved that wastewater quality may change significantly in the sampling tubing and vessels; during the sampling process even nitrification can happen. Regarding sludge settling measurements, effects of dilution, temperature, floc structure, nitrate and dissolved oxygen concentrations as well as current biochemical condition of the sludge sample have been studied and important recommendations provided. A combined comparative method including SVI and DSVI measurements has been elaborated for indication and early warning alert of undesired floc structure transformations. Influent BOD5 concentration is a key factor for describing biodegradability and denitrification capacity of wastewater to be treated. Results of the two most commonly used BOD testing methods were compared for preclarified wastewater. An electrochemical measurement technique provided significantly lower BOD5 concentrations compared to manometric analysis results with a difference of 23% and 15% on average for unfiltered and filtered samples, respectively. Effects of BOD-based fractionation deviations on predictable denitrification efficiency were studied at different inlet C/N ratios by simulating existing full-scale wastewater treatment plants resulting in remarkable differences in effluent nitrate concentrations. Based on the results, application of the manometric BOD measurement method proved to be preferable.

Keywords : wastewater sampling; measurement errors; data accuracy; biochemical oxygen demand; sludge volume index; activated sludge model.

        · text in English     · English ( pdf )


Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License