SciELO - Scientific Electronic Library Online

 
vol.41 número1Threats and opportunities for post-closure development in dolomitic gold mining areas of the West Rand and Far West Rand (South Africa) - a hydraulic view part 3: planning and uncertainty - lessons from historyA falling-head procedure for the measurement of filter media sphericity índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Em processo de indexaçãoSimilares em Google

Compartilhar


Water SA

versão On-line ISSN 1816-7950
versão impressa ISSN 0378-4738

Resumo

LEE, Hang Bok  e  KIM, Byung-Woo. Characterisation of hydraulically-active fractures in a fractured granite aquifer. Water SA [online]. 2015, vol.41, n.1, pp.139-148. ISSN 1816-7950.  http://dx.doi.org/10.4314/wsa.v41i1.17.

In this study, the practical usefulness and fundamental applicability of a self-potential (SP) method for identifying the hydraulically-active fractures were evaluated by a comparison of SP methods with other geophysical logging methods and hydraulic tests. Potentially permeable fractures intersecting a shallow, 10-m borehole were first identified using conventional geophysical methods such as acoustic borehole televiewer imaging and temperature, electrical conductivity and gamma-gamma logs. These results were then compared to results of analysis using the SP method. Constant pressure injection and recovery tests were conducted for verification of the hydraulic properties of the fractures identified by various logging methods. The acoustic borehole televiewer and gamma-gamma logs detected the openings or weathering zones associated with fractures intersecting the borehole, but they could not prove that groundwater was flowing through the detected fractures. The temperature and fluid-column electrical conductivity logs were unable to detect the fractured zones where groundwater in the borehole flows out to the surrounding rock aquifers. Comparison of results from the different methods tested showed that the most effective correlation between logs and the distribution of hydraulic conductivity was given by the SP signals, and that SP logging can accurately indicate the location of hydraulically-active permeable fractures. Based on these results, the SP method is recommended for determining the location of hydraulically-active fractures rather than other conventional geophysical logs. This self-potential method can be effectively applied in the initial stage of a site investigation to select the optimal site location or to evaluate the hydrogeological properties of fractures in underground exploration studies, such as those related geothermal reservoir evaluation and radioactive waste disposal.

Palavras-chave : self-potential method; hydraulically-conductive fractures; constant pressure injection and recovery tests; underground structure.

        · texto em Inglês     · Inglês ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons