SciELO - Scientific Electronic Library Online

 
vol.36 issue1Cr(VI) generation during sample preparation of solid samples: a chromite ore case studyPhthalate ester plasticizers in freshwater systems of Venda, South Africa and potential health effects author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Water SA

On-line version ISSN 1816-7950

Abstract

PAN, Xiangliang et al. A comparison of five extraction methods for extracellular polymeric substances (EPS) from biofilm by using three-dimensional excitation-emission matrix (3DEEM) fluorescence spectroscopy. Water SA (Online) [online]. 2010, vol.36, n.1, pp. 111-116. ISSN 1816-7950.

Two physical methods (centrifugation and ultrasonication) and 3 chemical methods (extraction with EDTA, extraction with formaldehyde, and extraction with formaldehyde plus NaOH) for extraction of EPS from alga-bacteria biofilm were assessed. Pretreatment with ultrasound at low intensity doubled the EPS yield without significant modification of the composition of EPS. Extraction with EDTA or extraction with formaldehyde plus NaOH increased yield by about 1 order of magnitude compared with other methods. However, the protein and polysaccharide content in EPS prepared with EDTA or formaldehyde plus NaOH were low. Two fluorescence peaks belonging to protein-like peaks and 2 fluorescence peaks belonging to humic acid-like substances were found in 3DEEM fluorescence spectra of all the EPS samples prepared using different methods. Fulvic-like fluorescence was detected only in the EPS extracted with formaldehyde plus NaOH. Location of, and fluorescence intensity at, each peak were clearly affected by the extraction methods. Dialysis was also found to be an important factor influencing the yield, composition and fluorescence characteristics of EPS.

Keywords : biofilm; extracellular polymeric substances; 3DEEM fluorescence spectroscopy.

        · text in English     · pdf in English