SciELO - Scientific Electronic Library Online

 
vol.35 número4Horizontal subsurface flow constructed wetlands for mitigation of ametryn-contaminated waterRecent blooms of the dinoflagellate Ceratium in Albert Falls Dam (KZN): history, causes, spatial features and impacts on a reservoir ecosystem and its zooplankton índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Em processo de indexaçãoSimilares em Google

Compartilhar


Water SA

versão On-line ISSN 1816-7950
versão impressa ISSN 0378-4738

Resumo

MHLANGA, FT et al. Simulation of a wastewater treatment plant receiving industrial effluents. Water SA [online]. 2009, vol.35, n.4, pp.447-454. ISSN 1816-7950.

A process model simulating the Mariannridge Wastewater Treatment Plant, located in the eThekwini Municipality, has been developed in the WEST (Worldwide Engine for Simulation, Training and Automation) modelling environment, based on the IWA Activated Sludge Model No. 3 (ASM3). The treatment plant receives a high proportion of industrial effluents. The development of the model involves the characterisation of the influent wastewater and determining model parameters (kinetic and stoichiometric coefficients) by undertaking batch respirometric tests on the wastewater and activated sludge, flocculation filtration and simulation of the batch respirometric experiment. To account for equipment-specific factors, the simulation model was calibrated against plant data covering a year's operation. The model is intended to be used as part of a system to evaluate the ability of a receiving wastewater treatment works to adequately treat a particular industrial effluent before granting a permit for it to be discharged to sewer.

Palavras-chave : oxygen uptake rate; activated sludge process; calibration.

        · texto em Inglês     · Inglês ( pdf )